Accusplit A925MXTBL Petunjuk Pengoperasian - Halaman 2

Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian untuk Menonton Accusplit A925MXTBL. Accusplit A925MXTBL 2 halaman. Wrist-worn stopwatch with split memory

Halaman Cetak

TRIPLE MODE TIMER

The Timer can Count Down to Alarm,

Count Up to Alarm, or Count Down to

Alarm, and then Up. When you see a

small arrow or arrows in the lower left

hand corner of display, you are in Timer

mode. This is how the display looks in

Timer Mode.

Number of

Cycles to

Repeat

Countdown

Interval

Watch is in

Countdown

Timer Mode

Timer Set Instructions

S1 (2 sec) - Enter set function OR

S1 (4sec) - Enter set function & clear the

current settings

S2 select select field to be set (selected

field will flash)

S3 Set set field to desired settings

S4 exit exit setting function

Upon entering set function, you can

choose Count Down (#), Count Up ($),

or Count Down, then Up function ($#).

The next fields to be set are: Number of

Cycles to Repeat (not in Count Down-

Up), Hours, Tens of minutes, Minutes,

Tens of Seconds, Seconds, then repeat.

Note: Count Up Timer can be used as an

Event Stopwatch. Since 0:00:00 is inter-

preted as 30:00:00, Count Up Timer with

no time interval set will count up to 20

hours, as a time-out stopwatch.

Count Down or Count Up Timer

Operating Instructions

S2 - Start.

Top line of display shows number of

timing cycles to perform & number

of timing cycles preformed.

Middle line shows Time Interval for

each cycle.

Bottom line of display shows Time

Remaining (count down) or Elapsed

Time ( count up).

S2 - Stop. Display also shows "STOP"

S2 (2sec) - Reset to beginning

Please return your A925MXTBL

registration to the Repair Center

address in the warranty, and

we will let you know about

future products.

980-300A

At end of every time interval, alarm

sounds for 5 seconds & timing cycle

repeats until stopped or cycle count

matches pre-programmed number of

cycles.

TIME OF DAY MODE

The watch keeps track of two complete

sets of time/day/date/alarm info (T1 and

Number of

T2). "T2" shows when the watch is in

Cycles

Time-of-Day mode #2. This is how the

Completed

display looks in Time-of-Day Mode:

so far

Month, Date,

and Day

Remaining

Time for this

Indicates

Interval

Watch in Time-

of-Day Mode 2

Setting the Time of Day, Day-Date,

and Alarms

Press ( repeatedly until you are in T1 or

T2, as desired.

S1 (2 sec) - Enter Set function

S2 - select select field to be set (field

will flash)

S3 - Set field to desired settings

Using Time of Day, Day, Date &

Alarm Functions

S3 - Alternates between Alarm & Day-

Date Display

Any button - Stops alarm sound

While in Alarm Display:

S2 - Changes Alarm & chime arm status:

Each press rotates through Alarm only

(display shows

neither.

Power Reset:

• Push and hold S2 and S3 - Display

turns OFF

• Release all - Display shows all

segments ON then displays stopwatch

at 0:00:00.00

Changing the Battery

When Low-Battery Indicator is "ON, "

replace the unit's battery with a new Type

CR2016 Lithium cell, or equivalent.

Email __________________________

User ___________________________

_______________________________

Time

), Hourly chime

), or Both, then

NO-PROOF-OF-PURCHASE LIMITED WARRANTY

See label on back of unit for details, or check

http://support.ACCUSPLIT.com

PERFORMANCE SPECIFICATIONS

Stopwatch Performance Function

& Features

• 16 Dual Distance Split Automatic

Memory

• Hour, Minute, Second to 1/100 Sec

• 30 Hour Range

• Computers & Recalls Ave Lap Split

• Anytime Memory Review

• Rapid Memory Review

• FIFS (First In First Saved) Memory

• LIFO (last in First out) Memory

• Display True Split Count

• 1-Button Rapid Split & Reset Action

• Dual Split Timing

• Split Counter to 999 with Rollover

• Return to Running Dual Split

Timer Performance Function & Features

• Triple Mode Timer: Count Down to alarm,

• Count up to alarm, or Count down to

alarm, then count up.

• Start- stop 1/10 second stopwatch

• Auto Repeat of Count Down or Count Up

timer to pre-Programmed Cycle Count

• Displays preprogrammed Count Down,

up cycle count

• Display cycle completed

• 30 Hour Range (0:00:00=30:00:00)

• Hours, Minutes, Seconds Setting

• Hours, Minutes, Seconds, 1/10 Sec

Timing Display

Time of Day and Time of Day Alarm Func-

tions and Features

• Time Day-Month, Day, Alarm

• 2nd Time, Date-Month, Day, Alarm

• Hourly Chime

General Performance Features

• 5 year NO-PROOF OF PURCHASE

Warranty

• NO-FAIL, Million – Cycle Switches

• Bold, Easy-to-Read Digits

• 60 degree Comfort Viewing Angle

• Water Resistant

• Shock Resistant

• 32,768Hz Quarts Crystal accuracy

to +or- 0.01 sec/hr

• 1.5 Year Battery Life

• Low-Battery Indicator

• Accurate Temp: 5C-35C (41F-95F)

• Operating Temp: -10C0-60C (14F-140F)