Cisco 3750 - Catalyst EMI Switch Panduan Memulai - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Memulai untuk Beralih Cisco 3750 - Catalyst EMI Switch. Cisco 3750 - Catalyst EMI Switch 33 halaman. Catalyst 3750 series switches
Juga untuk Cisco 3750 - Catalyst EMI Switch: Lembar data (18 halaman), Panduan Instalasi (47 halaman), Faq (10 halaman), Buletin Produk (5 halaman), Buletin Dukungan Produk (6 halaman), Ikhtisar Produk (25 halaman), Deskripsi (1 halaman), Lembar data (23 halaman), Buletin Dukungan Produk (6 halaman), Panduan Memulai (27 halaman), Lembar data (23 halaman)

Cisco 3750 - Catalyst EMI Switch Panduan Memulai

Other Management Options

You can use SNMP management applications such as CiscoWorks Small Network Management
Solution (SNMS) and HP OpenView to configure and manage the switch. You also can manage it
from an SNMP-compatible workstation that is running platforms such as HP OpenView or
SunNet Manager.
The Cisco IE2100 Series Configuration Registrar is a network management device that works with
embedded Cisco Networking Services (CNS) agents in the switch software. You can use IE2100 to
automate initial configurations and configuration updates on the switch.
See the "Accessing Help Online" section on page 23 for a list of supporting documentation.
5

Planning Switch Stacks

Before connecting the Catalyst 3750 switches in a stack, keep in mind these planning considerations:
• The size of the switch. See the"Technical Specifications" appendix of the Catalyst 3750 Switch
Hardware Installation Guide for the switch dimensions.
size makes it easier to cable the switches.
• Length of cable. Depending on the configuration of your switch stack, you might need different
sized cables.
If you don't specify the length of the StackWise cable, the 0.5-meter cable is supplied.
If you require the 1-meter cable or 3-meter cable, you can order it from your Cisco supplier. For
cable numbers, see the Catalyst 3750 Switch Hardware Installation Guide.
For concepts and procedures to manage switch stacks, refer to the switch software
Note
configuration guide.
Stacking together switches of the same
9