Cisco 3750 - Catalyst EMI Switch 시작하기 매뉴얼 - 페이지 9

{카테고리_이름} Cisco 3750 - Catalyst EMI Switch에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 3750 - Catalyst EMI Switch 33 페이지. Catalyst 3750 series switches
Cisco 3750 - Catalyst EMI Switch에 대해서도 마찬가지입니다: 데이터시트 (18 페이지), 설치 매뉴얼 (47 페이지), 자주 묻는 질문 (10 페이지), 제품 게시판 (5 페이지), 제품 지원 게시판 (6 페이지), 제품 개요 (25 페이지), 설명 (1 페이지), 데이터시트 (23 페이지), 제품 지원 게시판 (6 페이지), 시작하기 매뉴얼 (27 페이지), 데이터시트 (23 페이지)

Other Management Options

You can use SNMP management applications such as CiscoWorks Small Network Management

Solution (SNMS) and HP OpenView to configure and manage the switch. You also can manage it

from an SNMP-compatible workstation that is running platforms such as HP OpenView or

SunNet Manager.

The Cisco IE2100 Series Configuration Registrar is a network management device that works with

embedded Cisco Networking Services (CNS) agents in the switch software. You can use IE2100 to

automate initial configurations and configuration updates on the switch.

See the "Accessing Help Online" section on page 23 for a list of supporting documentation.

Before connecting the Catalyst 3750 switches in a stack, keep in mind these planning considerations:

• The size of the switch. See the"Technical Specifications" appendix of the Catalyst 3750 Switch

Hardware Installation Guide for the switch dimensions.

size makes it easier to cable the switches.

• Length of cable. Depending on the configuration of your switch stack, you might need different

sized cables.

If you don't specify the length of the StackWise cable, the 0.5-meter cable is supplied.

If you require the 1-meter cable or 3-meter cable, you can order it from your Cisco supplier. For

cable numbers, see the Catalyst 3750 Switch Hardware Installation Guide.

For concepts and procedures to manage switch stacks, refer to the switch software

Note

configuration guide.

Stacking together switches of the same