Cisco 3750 - Catalyst EMI Switch 시작하기 매뉴얼 - 페이지 7

{카테고리_이름} Cisco 3750 - Catalyst EMI Switch에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 3750 - Catalyst EMI Switch 33 페이지. Catalyst 3750 series switches
Cisco 3750 - Catalyst EMI Switch에 대해서도 마찬가지입니다: 데이터시트 (18 페이지), 설치 매뉴얼 (47 페이지), 자주 묻는 질문 (10 페이지), 제품 게시판 (5 페이지), 제품 지원 게시판 (6 페이지), 제품 개요 (25 페이지), 설명 (1 페이지), 데이터시트 (23 페이지), 제품 지원 게시판 (6 페이지), 시작하기 매뉴얼 (27 페이지), 데이터시트 (23 페이지)

Click Submit to save your settings, or click Cancel to clear your settings.

Step 14

When you click Submit, the switch is configured and exits Express Setup mode. The PC

displays a warning message, and then attempts to connect with the new switch IP address.

If you configured the switch with an IP address that is in a different subnet from the PC,

connectivity between the PC and the switch is lost.

Disconnect the switch from the PC, and install the switch in your production network. See

Step 15

the "Managing the Switch" section on page 7 for information about configuring and

If you need to rerun Express Setup, see the "Resetting the Switch" section on page 23.

Refreshing the PC IP Address

After you complete Express Setup, you should refresh the PC IP address:

• For a dynamically assigned IP address, disconnect the PC from the switch, and reconnect the PC

to the network. The network DHCP server assigns a new IP address to the PC.

• For a statically assigned IP address, change it to the previously configured IP address.

Managing the Switch

After you complete Express Setup and install the switch in your network, use the device manager or

other management options described in this section for further configuration.

The simplest way to manage the switch is by using the device manager that is in the switch memory.

This is an easy-to-use web interface that offers quick configuration and monitoring. You can access

the device manager from anywhere in your network through a web browser.

Follow these steps:

1. Launch a web browser on your PC or workstation.

2. Enter the switch IP address in the web browser, and press Enter. The device manager page appears.

3. Use the device manager to perform basic switch configuration and monitoring. Refer to the device

manager online help for more information.

4. For more advanced configuration, download and run the Cisco Network Assistant, which is

described in the next section.