Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Panduan Pemecahan Masalah - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pemecahan Masalah untuk Beralih Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion. Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion 11 halaman. Distributed forwarding card 4 for ws-x68xx, ws-x69xx, and select ws-x67xx modules
Juga untuk Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion: Catatan Instalasi (14 halaman), Panduan Solusi (17 halaman), Catatan Instalasi (46 halaman), Buku Putih (19 halaman), Deskripsi (1 halaman), Buletin Produk (6 halaman), Pemberitahuan (4 halaman), Lembar data (9 halaman), Lembar data (18 halaman), Buku Putih (18 halaman), Panduan Konfigurasi (8 halaman), Catatan Instalasi (28 halaman), Catatan Instalasi (18 halaman), Panduan Pengguna (17 halaman), Catatan Instalasi (24 halaman), Manual (19 halaman), Catatan Instalasi (36 halaman)

Halaman Cetak
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Panduan Pemecahan Masalah
Appendix B
Troubleshooting
Error Message %MWAM_FUR-1-INFO: "%s\n"

System Error Messages

Error Message %MWAM-0-ADDRESS_TRAP: "Address trap: %d occurred on physical address:
0x%llx at EPC: 0x%x, ERR_EPC: 0x%x"
Error Message %MWAM-0-UNCORRECTABLE_ECC_ERR: "An uncorrectable ECC error has
occurred, A_BUS_L2_ERRORS: 0x%llx, A_BUS_MEMIO_ERRORS: 0x%llx,
A_SCD_BUS_ERR_STATUS: 0x%llx"
Error Message %MWAM-0-CORRECTABLE_ECC_ERR: "A correctable ECC error has occurred,
A_BUS_L2_ERRORS: 0x%llx, A_BUS_MEMIO_ERRORS: 0x%llx, A_SCD_BUS_ERR_STATUS:
0x%llx"
Error Message %MWAM-0-MISDIRECTED_INTERRUPT: "A misdirected interrupt occurred with
int_mask: 0x%x"
OL-7469-04
Explanation
Information about the Field-Upgradable ROMMON.
If this message recurs, copy the error message exactly as it appears on the
Recommended Action
console or in the system log. Research and attempt to resolve the error using the Output Interpreter
"OUTPUT_INTERPRETER." Also perform a search of the Bug Toolkit "BUG_TOOLKIT." If you
still require assistance, open a case with the Technical Assistance Center via the Internet
"TAC_CASE_OPEN," or contact your Cisco technical support representative and provide the
representative with the collected information.
Explanation
A previously defined address trap has occurred.
Copy the error message exactly as it appears, and report it to your technical
Recommended Action
support representative.
An uncorrectable ECC error has occurred.
Explanation
Copy the error message exactly as it appears, and report it to your technical
Recommended Action
support representative.
A correctable ECC error has occurred.
Explanation
Recommended Action
Copy the error message exactly as it appears, and report it to your technical
support representative.
A misdirected interrupt occurred.
Explanation
Recommended Action
Copy the error message exactly as it appears, and report it to your technical
support representative.
Multiprocessor WAN Application Module User Guide
MWAM System Error Messages
B-9