Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Troubleshooting Manual - Page 9

Browse online or download pdf Troubleshooting Manual for Switch Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion. Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion 11 pages. Distributed forwarding card 4 for ws-x68xx, ws-x69xx, and select ws-x67xx modules
Also for Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion: Installation Note (14 pages), Solution Manual (17 pages), Installation Note (46 pages), White Paper (19 pages), Description (1 pages), Product Bulletin (6 pages), Notice (4 pages), Datasheet (9 pages), Datasheet (18 pages), White Paper (18 pages), Configuration Manual (8 pages), Installation Note (28 pages), Installation Note (18 pages), User Manual (17 pages), Installation Note (24 pages), Manual (19 pages), Installation Note (36 pages)

Print Page
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Troubleshooting Manual
Appendix B
Troubleshooting
Error Message %MWAM_FUR-1-INFO: "%s\n"

System Error Messages

Error Message %MWAM-0-ADDRESS_TRAP: "Address trap: %d occurred on physical address:
0x%llx at EPC: 0x%x, ERR_EPC: 0x%x"
Error Message %MWAM-0-UNCORRECTABLE_ECC_ERR: "An uncorrectable ECC error has
occurred, A_BUS_L2_ERRORS: 0x%llx, A_BUS_MEMIO_ERRORS: 0x%llx,
A_SCD_BUS_ERR_STATUS: 0x%llx"
Error Message %MWAM-0-CORRECTABLE_ECC_ERR: "A correctable ECC error has occurred,
A_BUS_L2_ERRORS: 0x%llx, A_BUS_MEMIO_ERRORS: 0x%llx, A_SCD_BUS_ERR_STATUS:
0x%llx"
Error Message %MWAM-0-MISDIRECTED_INTERRUPT: "A misdirected interrupt occurred with
int_mask: 0x%x"
OL-7469-04
Explanation
Information about the Field-Upgradable ROMMON.
If this message recurs, copy the error message exactly as it appears on the
Recommended Action
console or in the system log. Research and attempt to resolve the error using the Output Interpreter
"OUTPUT_INTERPRETER." Also perform a search of the Bug Toolkit "BUG_TOOLKIT." If you
still require assistance, open a case with the Technical Assistance Center via the Internet
"TAC_CASE_OPEN," or contact your Cisco technical support representative and provide the
representative with the collected information.
Explanation
A previously defined address trap has occurred.
Copy the error message exactly as it appears, and report it to your technical
Recommended Action
support representative.
An uncorrectable ECC error has occurred.
Explanation
Copy the error message exactly as it appears, and report it to your technical
Recommended Action
support representative.
A correctable ECC error has occurred.
Explanation
Recommended Action
Copy the error message exactly as it appears, and report it to your technical
support representative.
A misdirected interrupt occurred.
Explanation
Recommended Action
Copy the error message exactly as it appears, and report it to your technical
support representative.
Multiprocessor WAN Application Module User Guide
MWAM System Error Messages
B-9