Cisco 9124 - mds multilayer fabric switch Panduan Pemasangan Perangkat Keras - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pemasangan Perangkat Keras untuk Beralih Cisco 9124 - mds multilayer fabric switch. Cisco 9124 - mds multilayer fabric switch 36 halaman. Mds 9000 series
Juga untuk Cisco 9124 - mds multilayer fabric switch: Spesifikasi (2 halaman), Lembar data (9 halaman), Spesifikasi (3 halaman), Panduan Konfigurasi (49 halaman), Catatan Rilis (48 halaman), Catatan Rilis (44 halaman), Catatan Rilis (36 halaman), Catatan Rilis (22 halaman), Catatan Rilis (3 halaman), Catatan Rilis (40 halaman), Manual (16 halaman)

Halaman Cetak

Cisco 9124 - mds multilayer fabric switch Panduan Pemasangan Perangkat Keras

Installing the Switch in a Cabinet or Rack

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Figure 2-5

Stabilize the switch in the rack by attaching the front rack-mount brackets to the front rack-mounting

Step 6

rails:

Insert two screws (12-24 or 10-32, depending on rack type) and through the cage nuts and the holes

in one of the front rack-mount brackets and into the threaded holes in the rack-mounting rail (see

Figure 2-6

Repeat for the front rack-mount bracket on the other side of the switch.

If you are installing the optional cable guides, place the cable guides in front of the front rack-mount

brackets, and then pass the screws through the cable guides, front rack-mount brackets, and mounting

rail. You can install one or both cable guides; if installing a single cable guide, it can be installed on

either side.

Cisco MDS 9100 Series Hardware Installation Guide

2-10

Sliding the Cisco MDS 9148, Cisco MDS 9134 Switch, or the Cisco MDS 9124 Switch onto the

Notched Slider Rails

Figure

2-7).

Chapter 2

Installing the Cisco MDS 9100 Series

OL-21514-01