Cisco 9124 - mds multilayer fabric switch Panduan Pemasangan Perangkat Keras - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pemasangan Perangkat Keras untuk Beralih Cisco 9124 - mds multilayer fabric switch. Cisco 9124 - mds multilayer fabric switch 36 halaman. Mds 9000 series
Juga untuk Cisco 9124 - mds multilayer fabric switch: Spesifikasi (2 halaman), Lembar data (9 halaman), Spesifikasi (3 halaman), Panduan Konfigurasi (49 halaman), Catatan Rilis (48 halaman), Catatan Rilis (44 halaman), Catatan Rilis (36 halaman), Catatan Rilis (22 halaman), Catatan Rilis (3 halaman), Catatan Rilis (40 halaman), Manual (16 halaman)

Halaman Cetak

Cisco 9124 - mds multilayer fabric switch Panduan Pemasangan Perangkat Keras

Chapter 2

Installing the Cisco MDS 9100 Series

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Insert the switch into the rack:

Step 5

By using both hands, position the switch with the back of the switch between the front

rack-mounting rails as shown in

Cisco MDS 9148 Switch, Cisco MDS 9134 Switch, or the Cisco MDS 9124 Switch, see

Align the two C brackets on either side of the switch with the slider rails installed in the rack. Slide

the C brackets onto the slider rails, and then gently slide the switch all the way into the rack. If the

switch does not slide easily, try realigning the C brackets on the slider rails.

Figure 2-4

OL-21514-01

Figure

Sliding the Cisco MDS 9100 Series onto the Slider Rails

Installing the Switch in a Cabinet or Rack

2-4. If you are using the notched rails, for the

Cisco MDS 9100 Series Hardware Installation Guide

Figure

2-5.

2-9