Cisco 9134 - MDS Multilayer Fabric Switch Panduan Pemasangan Perangkat Keras - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pemasangan Perangkat Keras untuk Beralih Cisco 9134 - MDS Multilayer Fabric Switch. Cisco 9134 - MDS Multilayer Fabric Switch 36 halaman. Mds 9000 series
Juga untuk Cisco 9134 - MDS Multilayer Fabric Switch: Spesifikasi (3 halaman), Panduan Konfigurasi (49 halaman), Catatan Rilis (48 halaman), Catatan Rilis (44 halaman), Catatan Rilis (22 halaman), Catatan Rilis (3 halaman), Catatan Rilis (40 halaman), Catatan Rilis (10 halaman), Manual (16 halaman)

Halaman Cetak

Cisco 9134 - MDS Multilayer Fabric Switch Panduan Pemasangan Perangkat Keras

Chapter 2

Installing the Cisco MDS 9100 Series

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Figure 2-1

Front rack-mount bracket

Install the slider rails in the rack. Position one of the slider rails against the rack mounting rails and align

Step 3

the screw holes as shown in

or the Cisco MDS 9124 Switch, see

Note

Attach the slider rail using two 12-24 screws or two 10-32 screws, depending on the rack rail thread type.

Step 4

For racks with square holes, insert the 12-24 cage nuts in position behind the mounting holes in the slider

rails.

Repeat with the other slider rail on the other side of the rack.

OL-21514-01

Front Rack-Mount Brackets and C Brackets Installed on the Cisco MDS 9100 Series

Figure

Depending on when you purchased your Cisco MDS 9124 Switch, you may have straight slider

rails like those shown in

Figure

2-3. Refer to the illustrations that show the type of rails that came with your switch.

C bracket

2-2. If you are using the notched slider rails for the Cisco MDS 9134

Figure

2-3.

2-2, or you may have the notched slider rails like those shown

Cisco MDS 9100 Series Hardware Installation Guide

Installing the Switch in a Cabinet or Rack

2-7