Cisco 9134 - MDS Multilayer Fabric Switch 하드웨어 설치 매뉴얼 - 페이지 7

{카테고리_이름} Cisco 9134 - MDS Multilayer Fabric Switch에 대한 하드웨어 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 9134 - MDS Multilayer Fabric Switch 36 페이지. Mds 9000 series
Cisco 9134 - MDS Multilayer Fabric Switch에 대해서도 마찬가지입니다: 사양 (3 페이지), 구성 매뉴얼 (49 페이지), 릴리스 노트 (48 페이지), 릴리스 노트 (44 페이지), 릴리스 노트 (22 페이지), 릴리스 노트 (3 페이지), 릴리스 노트 (40 페이지), 릴리스 정보 (10 페이지), 매뉴얼 (16 페이지)

페이지 인쇄
Cisco 9134 - MDS Multilayer Fabric Switch 하드웨어 설치 매뉴얼
Chapter 2
Installing the Cisco MDS 9100 Series
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 2-1
Front rack-mount bracket
1
Install the slider rails in the rack. Position one of the slider rails against the rack mounting rails and align
Step 3
the screw holes as shown in
or the Cisco MDS 9124 Switch, see
Note
Attach the slider rail using two 12-24 screws or two 10-32 screws, depending on the rack rail thread type.
Step 4
For racks with square holes, insert the 12-24 cage nuts in position behind the mounting holes in the slider
rails.
Repeat with the other slider rail on the other side of the rack.
a.
OL-21514-01
Front Rack-Mount Brackets and C Brackets Installed on the Cisco MDS 9100 Series
Figure
Depending on when you purchased your Cisco MDS 9124 Switch, you may have straight slider
rails like those shown in
Figure
in
Figure
2-3. Refer to the illustrations that show the type of rails that came with your switch.
1
C bracket
2
2-2. If you are using the notched slider rails for the Cisco MDS 9134
Figure
2-3.
2-2, or you may have the notched slider rails like those shown
Cisco MDS 9100 Series Hardware Installation Guide
Installing the Switch in a Cabinet or Rack
2
2-7