Cisco ASR 920 series Manual - Halaman 6

Jelajahi secara online atau unduh pdf Manual untuk Beralih Cisco ASR 920 series. Cisco ASR 920 series 36 halaman. Aggregation services router
Juga untuk Cisco ASR 920 series: Panduan Instalasi (36 halaman), Memulai (6 halaman), Panduan Instalasi (42 halaman), Panduan Pemasangan Perangkat Keras (46 halaman)

Halaman Cetak

Attaching the Cable Guides

SUMMARY STEPS

1. Position the chassis in the rack as follows:

2. Align the mounting holes in the bracket (and optional cable guide) with the mounting holes in the equipment

rack.

3. Install the four M6x12mm zinc-plated steel screws through the holes in the bracket and into the threaded

holes in the equipment rack posts.

4. Use a tape measure and level to verify that the chassis is installed straight and level.

DETAILED STEPS

Step 1

Position the chassis in the rack as follows:

• If the front of the chassis (front panel) is at the front of the rack, insert the rear of the chassis between the mounting

posts.

• If the rear of the chassis is at the front of the rack, insert the front of the chassis between the mounting posts.

Step 2

Align the mounting holes in the bracket (and optional cable guide) with the mounting holes in the equipment rack.

The following figure shows how to install the Cisco ASR 920 Series Router in a 19-inch EIA rack.

Figure 5: Installing the Chassis in a 19-inch EIA Rack

Step 3

Install the four M6x12mm zinc-plated steel screws through the holes in the bracket and into the threaded holes in the

equipment rack posts.

Step 4

Use a tape measure and level to verify that the chassis is installed straight and level.

Attaching the Cable Guides

The Cisco ASR 920 Series Router supports the following cable guides:

• A920-CBL-GUIDE (left and right)—help in routing the cables from all components on the front panel

Installing the Cisco ASR 920 Series Router

thereby enabling a proper cable-bending radius.

Installing the Cisco ASR 920 Series Router