Digiprog III Panduan Pengenalan - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengenalan untuk Aksesori Mobil Digiprog III. Digiprog III 10 halaman. Mileage correction tool

Digiprog Ltd.

www.digiprog.com

You must then tell your DigiProg which chip you are working on

before you read it. To do this you must press the

EEPROM

button at

the top of the screen. A sub-menu will now appear.

Select the

SET TYPE

button and choose 93C46. Your DigiProg

is now set up to read a 93C46 chip. Press

EEPROM

again, this time

selecting the

READ

button. Once the machine has finished reading

the chip, the information will be displayed on the DigiProg screen,

now press VERIFY this will ensure that the information on your

screen agrees with the Eeprom

INTRODUCTION

Page 7