Cisco C-series Nexus 5020 Panduan Pemasangan Perangkat Keras - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Pemasangan Perangkat Keras untuk Beralih Cisco C-series Nexus 5020. Cisco C-series Nexus 5020 19 halaman. Replacing an i/o module nexus 5000 series
Juga untuk Cisco C-series Nexus 5020: Spesifikasi (3 halaman), Lembar data (23 halaman), Catatan Rilis (26 halaman), Catatan Rilis (3 halaman), Manual (11 halaman)
Halaman Cetak
Chapter 4
Replacing Components
Figure 4-2
1
Loosen the captive screw on the right most fan
tray so that the screw is free of the I/O module.
With a hand on the fan module handle, pull the fan module out of the chassis (see Callout 2 in
Step 3
and place it on an antistatic surface.
Loosen the two captive screws on the I/O module so that they are no longer in contact with the chassis
Step 4
(see Callout 1 in
Figure 4-3
1
Loosen captive screws until they are no longer
attached to the chassis.
Holding the handle for the left fan module, pull the I/O module (which houses the fan module) part way
Step 5
out of the chassis (see Callout 2 in
Place your other hand under the I/O module to support its weight, and fully remove the module from the
Step 6
chassis (see Callout 1 in
Removing a Fan Tray from the I/O Module in the Chassis
Figure
4-3).
Detaching the I/O Module from the Chassis
1
Figure
4-3).
Figure
4-4).
Replacing an I/O Module for a Cisco Nexus 5548 Switch
1
2
2
Pull the fan tray out of the I/O module and
set on an antistatic surface.
1
2
2
Pull the I/O module part way out of the
chassis.
Cisco Nexus 5000 Series Hardware Installation Guide
Figure
4-2)
4-3