Cisco Catalyst 2900 Series Panduan Pemasangan Perangkat Keras - Halaman 10
Jelajahi secara online atau unduh pdf Panduan Pemasangan Perangkat Keras untuk Beralih Cisco Catalyst 2900 Series. Cisco Catalyst 2900 Series 47 halaman. Xl modules
Juga untuk Cisco Catalyst 2900 Series: Manual (19 halaman)
Halaman Cetak
Key Features
100BaseFX Modules
Catalyst 2900 Series XL Modules Hardware Installation Guide
1-4
Figure 1-1
10/100 Module
Tight en
Scre ws
1x
To Activ ate
WS -X29 14-X L-V
The 10/100 module is compatible with the IEEE 802.3 10BaseT standard and the
IEEE 802.3u 100BaseT standard. The ports use RJ-45 connectors and Category 5
unshielded twisted-pair (UTP) copper cabling. For connector and schematic
information, see Appendix B, "Connectors and Cables."
The 100BaseFX modules have either two or four switched 100BaseFX ports for
100-Mbps fiber-optic connectivity. The ports can run in half-duplex or full-duplex
modes. The module support the IEEE 802.3u 100BaseT standard and use
standard, duplex, SC connectors. Figure 1-2 and Figure 1-3 show the 100BaseFX
modules.
Figure 1-2
2-Port 100BaseFX Modules
Tight en
Scre ws
To Activ ate
1X
WS -X29 22-X L-V
Two 100BaseFX ports
LEDs
2x
3x
10B aseT /100 Bas eTX
Four 10/100 ports
LEDs
1
2
100 Bas eFX
Chapter 1
4x
Overview
78-5912-03