Cisco Catalyst 2900 Series Hardware installatiehandleiding - Pagina 10
Blader online of download pdf Hardware installatiehandleiding voor {categorie_naam} Cisco Catalyst 2900 Series. Cisco Catalyst 2900 Series 47 pagina's. Xl modules
Ook voor Cisco Catalyst 2900 Series: Handmatig (19 pagina's)
Pagina afdrukken
Key Features
100BaseFX Modules
Catalyst 2900 Series XL Modules Hardware Installation Guide
1-4
Figure 1-1
10/100 Module
Tight en
Scre ws
1x
To Activ ate
WS -X29 14-X L-V
The 10/100 module is compatible with the IEEE 802.3 10BaseT standard and the
IEEE 802.3u 100BaseT standard. The ports use RJ-45 connectors and Category 5
unshielded twisted-pair (UTP) copper cabling. For connector and schematic
information, see Appendix B, "Connectors and Cables."
The 100BaseFX modules have either two or four switched 100BaseFX ports for
100-Mbps fiber-optic connectivity. The ports can run in half-duplex or full-duplex
modes. The module support the IEEE 802.3u 100BaseT standard and use
standard, duplex, SC connectors. Figure 1-2 and Figure 1-3 show the 100BaseFX
modules.
Figure 1-2
2-Port 100BaseFX Modules
Tight en
Scre ws
To Activ ate
1X
WS -X29 22-X L-V
Two 100BaseFX ports
LEDs
2x
3x
10B aseT /100 Bas eTX
Four 10/100 ports
LEDs
1
2
100 Bas eFX
Chapter 1
4x
Overview
78-5912-03