Digisol DG-WA3000N Panduan Instalasi Cepat - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Instalasi Cepat untuk Titik Akses Nirkabel Digisol DG-WA3000N. Digisol DG-WA3000N 18 halaman. Ranger series
Halaman Cetak
Below given is the Access Point interface description.
Interfaces
Antennas
Power
LAN
Reset / WPS
Hardware Installation
Please follow the below mentioned instructions to build the network
connection between your new wireless Access Point and your
computers, network devices:
Fix two detachable dipole antennas to the antenna connectors of the
1
Access Point.
Connect the Access Point to ADSL modem, router, or switch/hub in
2
your network through the LAN port of the Access Point by using
Ethernet cable.
Connect the power adapter (5V DC, 1A) to the wall socket, and then
3
connect the other end of it to the 'Power' socket of the Access Point.
Please check all the LEDs on the front panel. 'PWR' LED should be
4
steadily ON, 'LAN' LED should be ON if the Access Point is correctly
connected to the ADSL modem, router or switch/hub.
Two reverse SMA antenna connectors for screwing detachable
antennas enclosed with the product.
Power connector, connects to power adapter.
Local Area Network (LAN) port.
Reset the Access Point to factory default settings (clear all settings)
or start WPS function. Press this button and hold for 10 seconds to
restore all settings to factory defaults, and press this button for less
than 5 seconds to start WPS function.
Description