Digisol DG-WA3000N 빠른 설치 매뉴얼 - 페이지 6

{카테고리_이름} Digisol DG-WA3000N에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digisol DG-WA3000N 18 페이지. Ranger series

Below given is the Access Point interface description.

Interfaces

Antennas

Power

LAN

Reset / WPS

Hardware Installation

Please follow the below mentioned instructions to build the network

connection between your new wireless Access Point and your

computers, network devices:

Fix two detachable dipole antennas to the antenna connectors of the

Access Point.

Connect the Access Point to ADSL modem, router, or switch/hub in

your network through the LAN port of the Access Point by using

Ethernet cable.

Connect the power adapter (5V DC, 1A) to the wall socket, and then

connect the other end of it to the 'Power' socket of the Access Point.

Please check all the LEDs on the front panel. 'PWR' LED should be

steadily ON, 'LAN' LED should be ON if the Access Point is correctly

connected to the ADSL modem, router or switch/hub.

Two reverse SMA antenna connectors for screwing detachable

antennas enclosed with the product.

Power connector, connects to power adapter.

Local Area Network (LAN) port.

Reset the Access Point to factory default settings (clear all settings)

or start WPS function. Press this button and hold for 10 seconds to

restore all settings to factory defaults, and press this button for less

than 5 seconds to start WPS function.

Description