Sharp AQUOS LC-20B10N Panduan Pengoperasian - Halaman 14
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk TV LCD Sharp AQUOS LC-20B10N. Sharp AQUOS LC-20B10N 29 halaman. Lcd colour television
Halaman Cetak
Presetting the Channels (MANUAL)
■ Setting a channel to a desired TV station
Upper control panel
4
1
Press MENU (PRESET-1) on the upper part of the
LCD TV set for more than 2 seconds to display the
AUTO mode screen.
Sound System
2
Press MENU (PRESET-1) to display the MANUAL
mode screen.
• Press MENU (PRESET-1) again to change the MANUAL
mode as shown below.
AUTO
MANUAL
3
Select the channel position using Channel Select or
CH (
)/(
).
4
Press VOL (–)/(+) (PRESET-2) to locate the channel
you want to preset to the position. Search is initiated
and when a TV signal is received during the search,
the search stops.
5
Repeat steps 3 and 4 above, to preset the channel
posi tions for other broad casts, etc.
6
Press MENU (PRESET-1) twice to return to the
normal screen.
NOTE
• System may not have been set correctly, if noise can be heard or
if there is no sound. In such a case, adjust "SOUND SYSTEM".
(See page 14.)
3
1, 2, 6
LANGUAGE
NORMAL SCREEN
■ In a weak reception area or under bad reception
conditions
Upper control panel
4
1
Press MENU (PRESET-1) on the upper part of the
LCD TV set for more than 2 seconds to display the
AUTO mode screen.
2
Press MENU (PRESET-1) to display the MANUAL
mode screen.
3
While the MANUAL mode screen is displayed, press
MENU (PRESET-1) for more than 2 seconds.
The channel position number remains in green.
4
Adjust for good reception using VOL (–)/(+)
(PRESET-2).
5
After fi nishing the adjustment, press MENU
(PRESET-1) to continue channel presetting.
NOTE
• While the MANUAL mode screen is displayed, press MENU
(PRESET-1).
(The LANGUAGE mode screen will appear.)
Preset (Continued)
1, 2, 3, 5
Press MENU for more than
2 seconds.
13