Sharp Aquos LC-20S4E Panduan Pengoperasian - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk TV LCD Sharp Aquos LC-20S4E. Sharp Aquos LC-20S4E 20 halaman. Lcd colour television
Halaman Cetak
Useful Features
: S e l e c t
O K : E n t e r
Picture Adjustments
Adjust the picture to suit your preference. See the table
below for the adjustment items.
1
Press MENU to display the Menu screen.
• The Picture Menu screen can be displayed directly by
pressing the Red button.
2
Press \/| to select "Picture".
3
Press '/" to select a specific adjustment item.
4
Press \/| to adjust the item to your desired position,
and press END to exit.
\ \ \ \ \ button
Selected item
Contrast
For less contrast
Brightness
For less brightness
Colour
For less colour
intensity
Tint
Skin tones become
purplish.
Sharpness
For less sharpness
Sound Adjustments
Adjust the sound quality and volume to suit your preference.
See the table below for the adjustment items.
1
1
Press MENU to display the Menu screen.
• The Sound Menu screen can be displayed directly by
pressing the Green button.
2
Press \/| to select "Sound".
3
Press '/" to select a specific adjustment item.
4
Press \/| to adjust the item to your desired position,
and press END to exit.
\ \ \ \ \ button
Selected item
Treble*
For weaker treble
Bass*
For weaker bass
Balance*
Decrease audio from
the right speaker.
* These items cannot be adjusted when "Sound via" is set to "Hi-fi".
NOTE
For the picture and sound adjustments
• When resetting all adjustment items to factory preset values,
perform the following procedure.
1 Press '/" to select "Reset", and press OK.
2 Press '/" to select "Yes", and press OK.
MENU : B a c k
E N D : E x i t
| | | | | button
For more contrast
For more brightness
For more colour
intensity
Skin tones become
greenish.
For more sharpness
| | | | | button
For stronger treble
For stronger bass
Decrease audio from
the left speaker.
Sound Mode Settings
You can make various sound mode settings.
1
Perform steps 1 and 2 in Sound Adjustments to
display the Sound Menu screen.
2
Press '/" to select the desired item, and press OK.
3
Press '/" to select the sound mode, and press OK.
4
Press END to exit.
Selected item
Sound via
TV
Hi-fi
Loudsp. sound
Stereo
Mono
Sound 1
Nicam
Mono
Mono
AV audio sig.
Sound 1
Sound wide*
On (For increasing the spread of the sound)
* This item cannot be selected when "Sound via" is set to "Hi-fi".
NOTE
For the "Sound via" setting
• When setting "Sound via" to "Hi-fi" in the Sound Menu screen, the
sound from the built-in speakers will be turned off. To exit this
mode, switch "Sound via" from "Hi-fi" to "TV" in the Sound Menu
screen.
• You can adjust the volume by pressing i (+)/(–).
Hi-fi Volume
20
For the "Loudsp. sound" setting
• The sound output modes differ depending on whether or not a
NICAM or A2 stereo signal is received. See "NICAM and A2
Stereo Broadcast Selection" below.
For the "AV audio sig." setting
• Select "Sound 1" or "Sound 2" when playing back the video from
mono-video recorders and "Sound 1+2" when playing back from
stereo-video recorders.
NICAM and A2 Stereo Broadcast Selection
This enables the selection of the reception mode when
receiving a NICAM-I, NICAM-B/G or an A2 stereo signal. To
let you enjoy NICAM or A2 stereo broadcasting, this LCD TV
set receives NICAM stereo system, A2 stereo system,
bilingual, and monaural broadcasts.
Each time you press
(Sound), the mode changes as
follows:
Broadcast
Stereo*
Stereo
NICAM
Mono
Stereo
A2 Stereo
Mono
* When "Mono" is selected, the TV sound is output monaurally.
NOTE
• If the button is not pressed for a few seconds, the mode setting is
automatically terminated and the LCD TV set returns to the normal
mode.
Choice
Sound 2
Sound 1+2
Mono
Sound 2
Sound 1+2
Bilingual
Monaural
Nicam
Sound 1
Sound 2
Mono
Sound 1+2
Mono
Sound 1
Sound 2
Mono
Sound 1+2
Off
–
9