- ページ 11

液晶テレビ Sharp Aquos LC-20S4EのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Sharp Aquos LC-20S4E 20 ページ。 Lcd colour television

ページを印刷する

Useful Features

: S e l e c t

O K : E n t e r

Picture Adjustments

Adjust the picture to suit your preference. See the table

below for the adjustment items.

Press MENU to display the Menu screen.

• The Picture Menu screen can be displayed directly by

pressing the Red button.

Press \/| to select "Picture".

Press '/" to select a specific adjustment item.

Press \/| to adjust the item to your desired position,

and press END to exit.

\ \ \ \ \ button

Selected item

Contrast

For less contrast

Brightness

For less brightness

Colour

For less colour

intensity

Tint

Skin tones become

purplish.

Sharpness

For less sharpness

Sound Adjustments

Adjust the sound quality and volume to suit your preference.

See the table below for the adjustment items.

Press MENU to display the Menu screen.

• The Sound Menu screen can be displayed directly by

pressing the Green button.

Press \/| to select "Sound".

Press '/" to select a specific adjustment item.

Press \/| to adjust the item to your desired position,

and press END to exit.

\ \ \ \ \ button

Selected item

Treble*

For weaker treble

Bass*

For weaker bass

Balance*

Decrease audio from

the right speaker.

* These items cannot be adjusted when "Sound via" is set to "Hi-fi".

NOTE

For the picture and sound adjustments

• When resetting all adjustment items to factory preset values,

perform the following procedure.

1 Press '/" to select "Reset", and press OK.

2 Press '/" to select "Yes", and press OK.

MENU : B a c k

E N D : E x i t

For more contrast

For more brightness

For more colour

intensity

Skin tones become

greenish.

For more sharpness

For stronger treble

For stronger bass

Decrease audio from

the left speaker.

Sound Mode Settings

You can make various sound mode settings.

Perform steps 1 and 2 in Sound Adjustments to

display the Sound Menu screen.

Press '/" to select the desired item, and press OK.

Press '/" to select the sound mode, and press OK.

Press END to exit.

Selected item

Sound via

Hi-fi

Loudsp. sound

Stereo

Mono

Sound 1

Nicam

Mono

AV audio sig.

Sound 1

Sound wide*

On (For increasing the spread of the sound)

* This item cannot be selected when "Sound via" is set to "Hi-fi".

NOTE

For the "Sound via" setting

• When setting "Sound via" to "Hi-fi" in the Sound Menu screen, the

sound from the built-in speakers will be turned off. To exit this

mode, switch "Sound via" from "Hi-fi" to "TV" in the Sound Menu

screen.

• You can adjust the volume by pressing i (+)/(–).

Hi-fi Volume

For the "Loudsp. sound" setting

• The sound output modes differ depending on whether or not a

NICAM or A2 stereo signal is received. See "NICAM and A2

Stereo Broadcast Selection" below.

For the "AV audio sig." setting

• Select "Sound 1" or "Sound 2" when playing back the video from

mono-video recorders and "Sound 1+2" when playing back from

stereo-video recorders.

NICAM and A2 Stereo Broadcast Selection

This enables the selection of the reception mode when

receiving a NICAM-I, NICAM-B/G or an A2 stereo signal. To

let you enjoy NICAM or A2 stereo broadcasting, this LCD TV

set receives NICAM stereo system, A2 stereo system,

bilingual, and monaural broadcasts.

Each time you press

(Sound), the mode changes as

follows:

Broadcast

Stereo*

Stereo

NICAM

Mono

Stereo

A2 Stereo

Mono

* When "Mono" is selected, the TV sound is output monaurally.

NOTE

• If the button is not pressed for a few seconds, the mode setting is

automatically terminated and the LCD TV set returns to the normal

mode.

Choice

Sound 2

Sound 1+2

Mono

Sound 2

Sound 1+2

Bilingual

Monaural

Nicam

Sound 1

Sound 2

Mono

Sound 1+2

Mono

Sound 1

Sound 2

Mono

Sound 1+2

Off

–