Sharp CD-BA300 Panduan Pengoperasian - Halaman 21

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Sistem stereo Sharp CD-BA300. Sharp CD-BA300 32 halaman. Cdba300 operation manual
Juga untuk Sharp CD-BA300: Panduan Cepat (4 halaman)

Sharp CD-BA300 Panduan Pengoperasian

Listening to the memorized station

Memorizing a station
You can store 40 AM and FM stations in memory and recall them at the push of a
button. (Preset tuning)
1
Perform the steps 1 - 3 in "Listening to the Radio" on page 20.
2
Press the MEMORY/SET button to enter the preset tuning saving
mode.
3
Within 30 seconds, press the 5
4 button to select the preset channel number.
2
2
2 4
2
2
4
4
4
Store the stations in memory, in order, starting with preset channel 1.
4
Within 30 seconds, press the MEMORY/SET button to store that
station in memory.
If the "MEMORY" and preset number indicators go out before the station is
memorized, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a preset
station.
When a new station is stored in memory, the station previously memorized will
be erased.
Note:
The backup function protects the memorized stations for a few hours should there be
a power failure or the AC power cord disconnection.
*BA300_P20_21
21
3 PRESET X X X X X or W W W W W PRESET
5 3
5
5
5
3
3
3
To recall a memorized station
Press the 5
3 PRESET X X X X X or W W W W W PRESET 2
5
5
5
5 3
3
3
3
than 0.5 seconds to select the desired station.
Preset channel
This can be operated by pressing the PRESET (X or W) button on the remote control.
To scan the preset stations
The stations saved in memory can be scanned automatically. (Preset memory scan)
1
Press the 5
3 PRESET X X X X X or W W W W W PRESET 2
5
5
5 3
5
3
3
3
more than 0.5 seconds.
The preset number will flash and the programmed stations will be tuned in
sequentially, for 5 seconds each.
This can be operated by pressing the PRESET (X or W) button on the
remote control.
2
Press the 5
3 PRESET X X X X X or W W W W W PRESET 2
5
5
5 3
5
3
3
3
when the desired station is located.
To erase entire preset memory
1. Press the ON/STAND-BY button to enter the stand-by mode.
2. Press the ON/STAND-BY button while holding down the TUNER (BAND) button
and X-BASS/DEMO button until "TUNER CL" appears.
Listening to the Radio (See page 20)
00.11.16, 2:51 PM
4 button for less
2 4
2
2
2
4
4
4
Frequency and frequency band
4 button for
2
2 4
2
2
4
4
4
4 button again
2
2
2
2 4
4
4
4
21