Sharp CD-BA300 운영 매뉴얼 - 페이지 21
{카테고리_이름} Sharp CD-BA300에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp CD-BA300 32 페이지. Cdba300 operation manual
Sharp CD-BA300에 대해서도 마찬가지입니다: 빠른 매뉴얼 (4 페이지)
페이지 인쇄
Listening to the memorized station
Memorizing a station
You can store 40 AM and FM stations in memory and recall them at the push of a
button. (Preset tuning)
1
Perform the steps 1 - 3 in "Listening to the Radio" on page 20.
2
Press the MEMORY/SET button to enter the preset tuning saving
mode.
3
Within 30 seconds, press the 5
4 button to select the preset channel number.
2
2
2 4
2
2
4
4
4
Store the stations in memory, in order, starting with preset channel 1.
4
Within 30 seconds, press the MEMORY/SET button to store that
station in memory.
If the "MEMORY" and preset number indicators go out before the station is
memorized, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a preset
station.
When a new station is stored in memory, the station previously memorized will
be erased.
Note:
The backup function protects the memorized stations for a few hours should there be
a power failure or the AC power cord disconnection.
*BA300_P20_21
21
3 PRESET X X X X X or W W W W W PRESET
5 3
5
5
5
3
3
3
To recall a memorized station
Press the 5
3 PRESET X X X X X or W W W W W PRESET 2
5
5
5
5 3
3
3
3
than 0.5 seconds to select the desired station.
Preset channel
This can be operated by pressing the PRESET (X or W) button on the remote control.
To scan the preset stations
The stations saved in memory can be scanned automatically. (Preset memory scan)
1
Press the 5
3 PRESET X X X X X or W W W W W PRESET 2
5
5
5 3
5
3
3
3
more than 0.5 seconds.
The preset number will flash and the programmed stations will be tuned in
sequentially, for 5 seconds each.
This can be operated by pressing the PRESET (X or W) button on the
remote control.
2
Press the 5
3 PRESET X X X X X or W W W W W PRESET 2
5
5
5 3
5
3
3
3
when the desired station is located.
To erase entire preset memory
1. Press the ON/STAND-BY button to enter the stand-by mode.
2. Press the ON/STAND-BY button while holding down the TUNER (BAND) button
and X-BASS/DEMO button until "TUNER CL" appears.
Listening to the Radio (See page 20)
00.11.16, 2:51 PM
4 button for less
2 4
2
2
2
4
4
4
Frequency and frequency band
4 button for
2
2 4
2
2
4
4
4
4 button again
2
2
2
2 4
4
4
4
21