Sharp CD-BA300 운영 매뉴얼 - 페이지 23

{카테고리_이름} Sharp CD-BA300에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp CD-BA300 32 페이지. Cdba300 operation manual
Sharp CD-BA300에 대해서도 마찬가지입니다: 빠른 매뉴얼 (4 페이지)

페이지 인쇄

Recording from the Radio

Before recording:

When recording important selections, make a preliminary test to ensure that the

desired material is properly recorded.

SHARP is not liable for damage or loss of your recording arising from malfunction of

this unit.

The volume and sound controls can be adjusted with no effect on the recorded

signal (Variable Sound Monitor).

For recording use only normal tape. Do not use metal and CrO

*BA300_P23_25

Recording can be operated in the TAPE 2 compartment. The TAPE 1 is for playback

only.

Tune in to the desired station. (See page 20.)

Load a cassette into the TAPE 2 cassette compartment with the

side to be recorded on facing you.

tapes.

Wind past the leader of the tape, on which recording cannot be performed.

Press the REC PAUSE I6

Recording will be paused.

Press the 0/R

0/R button on the main unit or the TAPE 2 0 0 0 0 0 button

0/R

on the remote control to start recording.

To interrupt recording:

Press the REC PAUSE I6 (I6) button.

To resume recording, press 0/R (TAPE 2 0) button.

To stop recording:

Press the

(TAPE

) button.

Note:

If you hear a whistling noise while recording an AM station, move the AM loop antenna.

Erase-prevention tab of cassette tapes:

When recording on a cassette tape, make sure

that the erase-prevention tabs are not re-

moved.

Cassettes have removable tabs that prevent

accidental recording or erasing.

To protect the recorded sound, remove the tab

after recording.

Cover the tab hole with adhesive tape to record

on the tape without the tab.

00.11.16, 2:53 PM

I6 (I6

I6) button.

Side A

Tab for side B

Tab for side A

Listening to the Radio (See page 20)