Sharp AR-NB3 Operasi Pemindai Jaringan - Halaman 26

Jelajahi secara online atau unduh pdf Operasi Pemindai Jaringan untuk Semua dalam Satu Printer Sharp AR-NB3. Sharp AR-NB3 40 halaman. Digital copier/printer/multifunctional system option
Juga untuk Sharp AR-NB3: Manual Pencetakan (41 halaman), Manual Opsi (44 halaman)

Halaman Cetak
Sharp AR-NB3 Operasi Pemindai Jaringan
TRANSMITTING A TWO-SIDED ORIGINAL
Follow these steps to automatically transmit a two-sided original. (This is only possible on models that have an RSPF installed.)
Do not use an original that is not a standard size (A3, B4, A4, A4R, B5, B5R, A5, 11" x 17", 8-1/2" x 14", 8-1/2" x
Note
13", 8-1/2" x 11", 8-1/2" x 11"R, or 5-1/2" x 8-1/2").
Otherwise a scanning error or cut-off image may result.
1
Make sure the machine is in scan
mode.
PRINT
When the SCAN indicator is lit, the
machine is in scan mode. If the
indicator is not on, press the [SCAN]
SCAN
key. If auditing mode has been
LINE
DATA
COPY
EXP
enabled for the scan function in the
FAX
key operator programs, a message
SCAN COL
will appear prompting you to enter
your account number when you switch to scan mode. Enter your
account number (five digits) with the numeric keys.
2
Place the original(s) in the document
feeder tray.
For information on placing an original, see "4. COPY
FUNCTIONS" of the "Operation manual (for general
information and copier)".
3
Check the original size.
OPY
AUTO
2-SIDED
OUTPUT
ATIO
IMAGE
COPY
SPE
FORMAT
RESS
ORIGINAL SIZE DUPLEX SCAN
BROADCAST
Press the [ORIGINAL SIZE] key to open the original
size selection screen. See
SCANNING SIZE" (page 26)
4
Press the [DUPLEX SCAN] key.
TO
2-SIDED
OUTPUT
GE
COPY
SPECIAL FUNCTI
MAT
ORIGINAL SIZE DUPLEX SCAN
CAST
The duplex mode
selection screen appears.
• Two-sided scanning is not possible when "COLOUR MODE" is set to "COLOUR" or "GRAY".
Note
• Booklets and tablets
Two-sided originals that are bound at the side are booklets, and two-sided
originals that are bound at the top are tablets.
• Two-sided scanning mode turns off after the transmission is finished. Two-sided
scanning mode can also be cancelled by pressing the [CA] key.
• Two-sided scanning is only possible when an RSPF is used. Automatic scanning
of both sides of an original is not possible when the document glass is used.
• Two-sided scanning of originals longer than A3 (11" x 17") is not possible.
• To cancel two-sided scanning, select "1-SIDED" in step 5 and then press the [OK] key.
(Page
19)
ORIGINAL SIZE
AB
A3
B4
A4
"MANUALLY SETTING THE
to set the original size.
DUPLEX SCAN
1-SIDED
2-SIDED
HOW TO USE THE NETWORK SCANNER FUNCTION
5
Select "2-SIDED" with the [ ] or [ ]
key.
GH
PQR
2-SIDED
COPY
SPECIAL FUNCTION
6
Press the [OK] key.
The duplex original type
selection screen appears.
BACK
OK
GHI
7
Select booklet or tablet for the duplex
original type with the [ ] or [ ] key.
8
Press the [OK] key.
OK
You will return to the base screen and the duplex
scanning mode icon will appear.
9
Continue from step 4 of "BASIC
TRANSMISSION PROCEDURE"
DUPLEX SCAN
1-SIDED
2-SIDED
DUPLEX STYLE
BOOKLET
(page
20).
BOOKLET
TABLET
25
2