Sharp AR-NB3 Operasi Pemindai Jaringan - Halaman 28

Jelajahi secara online atau unduh pdf Operasi Pemindai Jaringan untuk Semua dalam Satu Printer Sharp AR-NB3. Sharp AR-NB3 40 halaman. Digital copier/printer/multifunctional system option
Juga untuk Sharp AR-NB3: Manual Pencetakan (41 halaman), Manual Opsi (44 halaman)

Halaman Cetak
Sharp AR-NB3 Operasi Pemindai Jaringan
Selecting an INCH original size
4
Select the original size with the [ ] or
[ ] key.
To return to the selection of inch original sizes, press
the [
] key and return to step 2.
SELECTING THE COLOUR MODE
After placing the original, you can select an appropriate colour mode for the original type. Place the original in the
document feeder tray or on the document glass (steps 1 to 3 on
The factory default setting for the colour mode is "COLOUR". To change the colour mode, follow these steps.
1
Press the [COLOUR MODE] key.
PAPER
PAPER
COP
COP
COPY EXPOSURE
COPY EXPOSURE
SELECT
SELECT
RAT
RAT
SCAN
SCAN
COLOUR MODE
COLOUR MODE
RESOLUTION ADDR
RESOLUTION ADDRE
FAX
FAX
PROGRAM
PROGRAM
The colour mode
selection screen appears.
2
Select the colour mode with the [ ] or
[ ] key.
GH
PQR
2-SIDED
COPY
SPECIAL FUNCTION
The selected mode is
highlighted.

SELECTING THE RESOLUTION

The scanning resolution can be selected. After selecting scan mode and placing the original (steps 1 to 3 on
20), perform the procedure below.
The factory default setting for the resolution is "150dpi" (e-mail/FTP mode).
If you need to change the resolution, follow these steps.
1
Press the [RESOLUTION] key.
PAPER
COPY
AUT
COPY EXPOSURE
SELECT
RATIO
IMAG
SCAN
COLOUR MODE
FORM
RESOLUTION ADDRESS
FAX
PROGRAM
BROADC
The resolution selection
screen appears.
ORIGINAL SIZE
INCH
11x17
8 x14
1
2
8 x13
1
2
COLOUR MODE
COLOUR
GRAY
B/W
COLOUR MODE
COLOUR
GRAY
B/W
RESOLUTION
100dpi
150dpi
200dpi
300dpi
HOW TO USE THE NETWORK SCANNER FUNCTION
5
Press the [OK] key.
You will return to the base
OK
screen and the selected original
size will appear in the original
display.
To cancel a manual original size setting,
Note
press the [CA] key.
If it is not possible to select the actual original
size, select a size that is larger than the actual
original size. If a smaller size is selected, part
of the original will not be transmitted.
page
20) and then follow the steps below.
COLOUR: Select this mode for colour originals.
GRAY
: Select this mode for a black and white
photograph or when a monochrome image
is needed.
B/W
: Select this mode when you wish to scan a
photo in monochrome or when you wish to
make text clearer.
3
Press the [OK] key.
You will return to the base
screen and the selected mode
BACK
OK
will appear in the colour mode
display.
GHI
Two-sided scanning is not possible when
Note
"COLOUR MODE" is set to "COLOUR" or "GRAY".
2
Select the resolution with the [ ] or
[ ] key.
GH
PQR
2-SIDED
COPY
SPECIAL FUNCTION
The selected resolution is
highlighted.
page
RESOLUTION
100dpi
150dpi
200dpi
300dpi
27
2