Sharp SJ-X600TP2 Panduan Pengoperasian - Halaman 30

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Kulkas Sharp SJ-X600TP2. Sharp SJ-X600TP2 32 halaman.

Problem

The control panel does not work.

(Only for SJ-X510GP2,

SJ-X550GP2, SJ-X600GP2)

Some lines are on the surface of

the plastic parts.

Door alarm does not stop.

(Only for SJ-X510TP2,

SJ-X550TP2, SJ-X600TP2)

If you still require service

Refer to your nearest service agent approved by SHARP.

02_OM_TINS-C051CBRZ 21DT_EN.indd 30

This may occur in one of the following cases.

• The panel or your ﬁ nger is soiled with dripping, oil and etc.

• When you touch the panel with gloved hand, adhesive bandage on your

ﬁ nger, nail or objects.

• Sticker or tape is afﬁ xed on the keys.

• Touch position is slightly off from the keys.

• Operate time is not enough for the keys to work.

• These are not defects during production.

The meeting part of the resin material or

the junction part of the metallic mold are

remained like lines.

If the door alarm does not stop after closing all doors, it is a defect. Contact the

SHARP service center for service.

Method of stopping the door alarm temporarily

Press "R" button and "F" button simultaneously

and continuously for 3 seconds or more.

• The door alarm will sound again after

approximately 2 days.

Solution

Beep beep beep

Line

24/1/2565 BE 14:30