Sharp Notevision PG-D40W3D Setup Manual - Halaman 17
Jelajahi secara online atau unduh pdf Setup Manual untuk Proyektor Sharp Notevision PG-D40W3D. Sharp Notevision PG-D40W3D 35 halaman. True xga/wxga data projectors
Juga untuk Sharp Notevision PG-D40W3D: Panduan Pengguna (2 halaman), Lembar Spesifikasi (2 halaman), Spesifikasi (2 halaman), Brosur & Spesifikasi (2 halaman)
Halaman Cetak
Confi rming the Projector
Status
(Status)
On this screen, you can confi rm the
projector status. You can confi rm the
following items:
•
MAC Address
•
Power
•
Condition
•
Lamp Timer
•
Lamp Life
•
Input
•
Signal Info
•
Serial Number
Note
•
If you click the "Refresh" button before the
screen is displayed completely, an error
message ("Server Busy Error") will be
displayed. Wait for a moment and then operate
again.
•
For details about each item, refer to the
projector's operation manual.
Controlling the Projector via LAN
Controlling the Projector
(Control)
On this screen, you can perform projector
control. You can control the following
items:
•
Power
•
Input Select
•
Volume
•
AV Mute
Note
•
If you click the "Refresh" button before the
screen is displayed completely, an error
message ("Server Busy Error") will be
displayed. Wait for a moment and then operate
again.
•
You cannot operate this page while the
projector is warming up.
•
While the projector is in standby mode, you can
only control "Power ON".
•
For details about each item, refer to the
projector's operation manual.
-17