Sharp Notevision PG-D40W3D Kurulum Kılavuzu - Sayfa 17
Projektör Sharp Notevision PG-D40W3D için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Sharp Notevision PG-D40W3D 35 sayfaları. True xga/wxga data projectors
Ayrıca Sharp Notevision PG-D40W3D için: Kullanıcı Kılavuzu (2 sayfalar), Şartname Sayfası (2 sayfalar), Teknik Özellikler (2 sayfalar), Broşür ve Teknik Özellikler (2 sayfalar)
Sayfayı Yazdır
Confi rming the Projector
Status
(Status)
On this screen, you can confi rm the
projector status. You can confi rm the
following items:
•
MAC Address
•
Power
•
Condition
•
Lamp Timer
•
Lamp Life
•
Input
•
Signal Info
•
Serial Number
Note
•
If you click the "Refresh" button before the
screen is displayed completely, an error
message ("Server Busy Error") will be
displayed. Wait for a moment and then operate
again.
•
For details about each item, refer to the
projector's operation manual.
Controlling the Projector via LAN
Controlling the Projector
(Control)
On this screen, you can perform projector
control. You can control the following
items:
•
Power
•
Input Select
•
Volume
•
AV Mute
Note
•
If you click the "Refresh" button before the
screen is displayed completely, an error
message ("Server Busy Error") will be
displayed. Wait for a moment and then operate
again.
•
You cannot operate this page while the
projector is warming up.
•
While the projector is in standby mode, you can
only control "Power ON".
•
For details about each item, refer to the
projector's operation manual.
-17