Shimano CLARIS FC-R2030 Panduan Dealer - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Dealer untuk Aksesori Sepeda Shimano CLARIS FC-R2030. Shimano CLARIS FC-R2030 20 halaman. Crankset

INSTALLATION

Installing the crank arms

(B)

(A)

(z)

(B)

(C)

(A)

Use the SHIMANO original tool to

tighten the cap.

Push in the stopper plate and check that

the plate pin is securely in place, and

then tighten the screws of the left crank

arm.

Tighten both screws equally to the

specified tightening torque (12 - 14 N·m).

(z)

The illustration is of the left crank

arm (cross-section)

(A)

TL-FC16

(B)

Cap

(C)

Apply grease:

Premium Grease

(Y04110000)

Tightening torque

0.7 - 1.5 N·m

(A)

Plate pin

(B)

Stopper plate

(C)

Left crank arm

Tightening torque

12 - 14 N·m

NOTICE

•

The two screws should be tightened

alternately in stages rather than each screw

being fully tightened at once.

•

Set the stopper plate in the correct

direction as shown in illustration.