Crestron 3 Series Panduan Memulai Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Sistem Kontrol Crestron 3 Series. Crestron 3 Series 6 halaman. Automated processors
Juga untuk Crestron 3 Series: Panduan Memulai Cepat (2 halaman), Mulai Cepat (2 halaman), Dari Manual (2 halaman), Dari Manual (2 halaman), Panduan Cepat (2 halaman), Panduan Memulai Cepat (2 halaman), Panduan Memulai Cepat (8 halaman), Panduan Pengoperasian (20 halaman)

RMC3

3-Series® Room Media Controller

5. (Optional) Secure the extender to the bracket using the two included

6-32 3/8 in. screws as shown in the following illustration.

DIN Rail Mounting

1. Detach the RMC3 from the mounting bracket by pulling the left and

right flanges of the bracket outward to release the tabs that hold the

RMC3 in place.

2. Pull the DIN rail release tab downward using a flat-head screwdriver.

3. Position the DIN rail mounting tabs (located on the rear of the

bracket) over the top edge of the DIN rail.

4. Push the DIN rail release tab upward to lock the mounting bracket

onto the rail.

5. Align the slots on the bottom of the RMC3 with the tabs on the

mounting bracket.

6. Press the RMC3 into the bracket until it snaps into place.

NOTE: Do not use the included screws to secure the bracket to the

bottom of the RMC3 when mounting into a DIN rail, as it will then not

be possible to remove the RMC3 from the DIN rail.

Quick Start