Digital Barriers BW600 Panduan Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kamera Digital Digital Barriers BW600. Digital Barriers BW600 10 halaman. Body worn cameras

Halaman Cetak
EDGEVIS BODY WORN CAMERAS
2) The assigned camera will show a flashing white light to assist with locating it. The camera selected for
assignment will be based on the current state of cameras in the pool. The same camera will not be assigned
every time.
3) Remove the assigned camera from the docking station by pulling it upwards.
4) The screen on the camera will update and show the camera viewpoint to indicate that it is in operational
mode.
VideoVault Camera Assignment
1)
Login to the VideoVault web interface using a valid user account. This may be a different account from the
Operator account to be assigned to the camera.
2) Go to the Devices tab, then select Find Devices. A list of cameras and their current state will be shown.
3) Identify a suitable camera with a status of "Unassigned". Select the Assign Camera button.
4) Enter the name of the Operator account to assign the camera to then press Return.
5) The assignment mode options are:
a. Single Use: The camera is to be assigned to this operator on a temporary basis (for example, for the
Operator's shift). When the camera is docked, charged and has completed uploading all recordings it
will be available for assignment again.
b. Permanent Use: The camera is assigned permanently to this operator, or until it is manually returned
to the unassigned pool. In this mode the camera will not be available for assignment to other
operators while it is docked. Once assigned, the camera can be removed from the docking station at
any point and it will retain the existing operator assignment.
c.
Permanent allocation: This option is not currently supported on BW600.
6) The Device Profile setting defines the settings to be applied to the camera. The settings will have been
defined by the System Administrator.
7)
Press the Assign Camera button. The assigned camera will show a flashing white light to assist with locating
it.
8) Remove the assigned camera from the docking station by pulling it upwards.
9) The screen on the camera will update and show the camera viewpoint to indicate that it is in operational
mode.
Regulatory Compliance (pending)
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
ISSUED: 2 FEBRUARY 2021
PAGE 7