Digital Barriers BW600 사용자 설명서 - 페이지 7

{카테고리_이름} Digital Barriers BW600에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Digital Barriers BW600 10 페이지. Body worn cameras

EDGEVIS BODY WORN CAMERAS

2) The assigned camera will show a flashing white light to assist with locating it. The camera selected for

assignment will be based on the current state of cameras in the pool. The same camera will not be assigned

every time.

3) Remove the assigned camera from the docking station by pulling it upwards.

4) The screen on the camera will update and show the camera viewpoint to indicate that it is in operational

mode.

VideoVault Camera Assignment

Operator account to be assigned to the camera.

2) Go to the Devices tab, then select Find Devices. A list of cameras and their current state will be shown.

3) Identify a suitable camera with a status of "Unassigned". Select the Assign Camera button.

4) Enter the name of the Operator account to assign the camera to then press Return.

5) The assignment mode options are:

a. Single Use: The camera is to be assigned to this operator on a temporary basis (for example, for the

Operator's shift). When the camera is docked, charged and has completed uploading all recordings it

will be available for assignment again.

b. Permanent Use: The camera is assigned permanently to this operator, or until it is manually returned

to the unassigned pool. In this mode the camera will not be available for assignment to other

operators while it is docked. Once assigned, the camera can be removed from the docking station at

any point and it will retain the existing operator assignment.

Permanent allocation: This option is not currently supported on BW600.

6) The Device Profile setting defines the settings to be applied to the camera. The settings will have been

defined by the System Administrator.

Press the Assign Camera button. The assigned camera will show a flashing white light to assist with locating

it.

8) Remove the assigned camera from the docking station by pulling it upwards.

9) The screen on the camera will update and show the camera viewpoint to indicate that it is in operational

mode.

Regulatory Compliance (pending)

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

ISSUED: 2 FEBRUARY 2021

PAGE 7