Digital Combo DK20S Manual - Halaman 6

Jelajahi secara online atau unduh pdf Manual untuk Alat Listrik Digital Combo DK20S. Digital Combo DK20S 20 halaman. Multi-purpose press

The Digital Height/Pressure gauge is a helpful indicator of the

current height of the top head as the operator adjusts the pressure.

•

To decrease the pressure, turn the

pressure knob to the left,

counterclockwise.

•

The top head will rise away from

the lower table.

•

To increase the pressure, turn the

pressure knob to the right,

clockwise.

•

The top head will lower toward the

pressing table.

•

If the pressure knob is turned

rapidly enough, the display will

change to the pressure gauge

display. The units of measure are

a relative scale from 0:00 to 10:00,

with :02 increments.

•

To view the current pressure display value without changing it, simply

pull the pin up on the pressure gauge device on the pack post and let

it drop back down. This will force the PRS display to appear.

The gauge displays a reference value based on the height of the

heat platen in relation to the lower table. The closer the heat platen is

to the substrate on the table, the heavier the pressure. The further

away, the lighter the pressure. The amount of actual force exerted

depends on the thickness of the item being pressed and the distance

from the heat platen to the table. The digital height/pressure gauge

simply shows a relative value from 0:00 to 10:00 in fine resolution

increments as to the current height of the platen.

This helps the user return to an exact pressure setting without

the need of multiple experimentations to find the proper pressure

setting. By simply changing the pressure until the correct value

appears, previous heights and pressure settings for different thickness

substrates can be quickly reset without error.