Digital Combo DK20S Manual - Halaman 8

Jelajahi secara online atau unduh pdf Manual untuk Alat Listrik Digital Combo DK20S. Digital Combo DK20S 20 halaman. Multi-purpose press

The main feature that makes the Digital Combo so versatile is

the interchangeability of the heat platens. Because the heat platens are

modular in their method of connection, one platen can be unplugged

and another plugged in, in its place. The mechanical connection to the

clamp is no more than a simple quick release pin.

The following instructions apply to the 14x16, 12x14, cap, plate

& mug heat platen attachments. All of them disconnect and connect in

the same manner.

•

The heat platen can be safely disconnected

with the machine on. However, thermal gloves

or oven mitts must be used when handling

hot heat platens.

•

Unplug the modular connector

This is done by unscrewing the safety lock

and pulling the connectors apart.

•

Lower the heat platen so it rests on the bottom

table, and do not clamp it.

•

Pull out the quick release pin from the linkage.

It is easiest to remove when there is no

pressure on the side links or on the heat platen

shaft.

•

Once the quick release pin is removed, lift the

handle away, exposing the heat platen shaft

now disconnected from the linkage.

•

Lift up on the heat platen slightly, enough to

swing it out away from the bottom table.

Lower the heat platen down and out of the

clamp linkage.

(1st figure above)