Digital Equipment DEC 3000 300 AXP Series Menyiapkan Sistem Anda - Halaman 11

Jelajahi secara online atau unduh pdf Menyiapkan Sistem Anda untuk Desktop Digital Equipment DEC 3000 300 AXP Series. Digital Equipment DEC 3000 300 AXP Series 13 halaman.

Halaman Cetak

9. Start the System

1. Be sure the power switch is set to off (O).

2. Plug the system unit power cord into a

grounded outlet.

3. Turn on ( | ) any expansion boxes.

4. Turn on any other device, such as

a printer or modem.

5. Turn on ( | ) the monitor.

6. Turn on ( | ) the system unit. The green power

indicator light

should come on, as shown in

in the next figure.

7. If your workstation had a yellow sticker over

the power connector, you have factory-installed

software (FIS) that automatically initiates the

operating system startup procedure. See your

FIS documentation.

8. If your workstation does not have FIS, turn on

the system and wait for the console prompt

(>>>). Then see your operating system installa-

tion guide.

MLO-010149

MLO-010143