Digital Equipment DEC 3000 300 AXP Series Налаштування системи - Сторінка 11
Переглянути онлайн або завантажити pdf Налаштування системи для Робочий стіл Digital Equipment DEC 3000 300 AXP Series. Digital Equipment DEC 3000 300 AXP Series 13 сторінок.
Друкувати сторінку9. Start the System
1. Be sure the power switch is set to off (O).
2. Plug the system unit power cord into a
grounded outlet.
3. Turn on ( | ) any expansion boxes.
4. Turn on any other device, such as
a printer or modem.
5. Turn on ( | ) the monitor.
6. Turn on ( | ) the system unit. The green power
indicator light
should come on, as shown in
1
in the next figure.
1
7. If your workstation had a yellow sticker over
the power connector, you have factory-installed
software (FIS) that automatically initiates the
operating system startup procedure. See your
FIS documentation.
8. If your workstation does not have FIS, turn on
the system and wait for the console prompt
(>>>). Then see your operating system installa-
tion guide.
MLO-010149
MLO-010143