Digital Equipment Prioris Series Manual - Halaman 9

Jelajahi secara online atau unduh pdf Manual untuk Server Digital Equipment Prioris Series. Digital Equipment Prioris Series 16 halaman.
Juga untuk Digital Equipment Prioris Series: Panduan Instalasi (15 halaman)

Halaman Cetak

Run the Quick Launch CD-ROM program

Use the Quick Launch CD-ROM disk to complete the

server installation. Follow these steps to configure your

server and install an operating system.

NOTE

This procedure assumes that no additional EISA, PCI,

or ISA cards have been installed in your server. If you

installed optional expansion card(s), you need to per-

form the instructions on the next page.

Installation Guide

1. Locate the Quick Launch CD-ROM disk in your

ServerWORKS software kit. Boot your server and in-

sert the CD-ROM disk. Press Ctrl + Alt + Del to re-

boot your server.

2. When prompted, enter the MS-DOS partition size.

Quick Launch then creates an MS-DOS partition on

the hard disk drive using the FDISK utility. Afterwards,

your server automatically reboots.

The Quick Launch main menu appears and all utili-

ties and related files (SCU, diagnostics, RAID, etc.)

are installed onto the MS-DOS partition.

3. Select Install Software from the Quick Launch main

menu. Choose Express for unattended operating

system installation of Microsoft Windows NT or No-

vell NetWare or choose Conventional for a traditional

operating system installation (SCO UNIX, OS/2, Mi-

crosoft Windows NT, or Novell NetWare).

Refer to the Quick Launch Reference Guide included

with the ServerWORKS software kit for detailed installa-

tion procedures.