Digital Equipment Prioris Series 매뉴얼 - 페이지 9

{카테고리_이름} Digital Equipment Prioris Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digital Equipment Prioris Series 16 페이지.
Digital Equipment Prioris Series에 대해서도 마찬가지입니다: 설치 매뉴얼 (15 페이지)

페이지 인쇄

Run the Quick Launch CD-ROM program

Use the Quick Launch CD-ROM disk to complete the

server installation. Follow these steps to configure your

server and install an operating system.

NOTE

This procedure assumes that no additional EISA, PCI,

or ISA cards have been installed in your server. If you

installed optional expansion card(s), you need to per-

form the instructions on the next page.

Installation Guide

1. Locate the Quick Launch CD-ROM disk in your

ServerWORKS software kit. Boot your server and in-

sert the CD-ROM disk. Press Ctrl + Alt + Del to re-

boot your server.

2. When prompted, enter the MS-DOS partition size.

Quick Launch then creates an MS-DOS partition on

the hard disk drive using the FDISK utility. Afterwards,

your server automatically reboots.

The Quick Launch main menu appears and all utili-

ties and related files (SCU, diagnostics, RAID, etc.)

are installed onto the MS-DOS partition.

3. Select Install Software from the Quick Launch main

menu. Choose Express for unattended operating

system installation of Microsoft Windows NT or No-

vell NetWare or choose Conventional for a traditional

operating system installation (SCO UNIX, OS/2, Mi-

crosoft Windows NT, or Novell NetWare).

Refer to the Quick Launch Reference Guide included

with the ServerWORKS software kit for detailed installa-

tion procedures.