Epson WorkForce WF-3540 Panduan Cepat - Halaman 28

Jelajahi secara online atau unduh pdf Panduan Cepat untuk Printer Epson WorkForce WF-3540. Epson WorkForce WF-3540 44 halaman. Epson workforce wf-3540 all-in-one printer
Juga untuk Epson WorkForce WF-3540: Petunjuk (4 halaman), Ikhtisar dan Spesifikasi Produk (2 halaman), Panduan Pengguna (13 halaman), (Panduan Instalasi) (4 halaman)

Halaman Cetak

Insert the new ink cartridge into the holder and push it down until it clicks into place.

Once you replace all the cartridges that need replacing, close the cartridge cover and

push it down until it clicks into place.

Lower the scanner to begin priming the ink. This takes a few minutes.

When you see a completion message on the LCD screen, ink priming is finished.

Caution: Never turn off the product while ink is priming or you'll waste ink. If you still

see an ink replacement message on the LCD screen, select Proceed, lift up the

scanner unit, and press down all the cartridges securely. Then lower the scanner unit. If

you remove a low or expended ink cartridge, you cannot reinstall and use the cartridge.

Note: If you replaced a cartridge while copying a document or photo, cancel printing

and make sure your original is still placed correctly on the document table. Then copy

your original again.

Replacing Ink Cartridges