Epson WorkForce WF-3540 Skrócona instrukcja obsługi - Strona 28

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Drukarka Epson WorkForce WF-3540. Epson WorkForce WF-3540 44 stron. Epson workforce wf-3540 all-in-one printer
Również dla Epson WorkForce WF-3540: Instrukcje (4 strony), Przegląd i specyfikacja produktu (2 strony), Podręcznik użytkownika (13 strony), (Podręcznik instalacji (4 strony)

Insert the new ink cartridge into the holder and push it down until it clicks into place.

Once you replace all the cartridges that need replacing, close the cartridge cover and

push it down until it clicks into place.

Lower the scanner to begin priming the ink. This takes a few minutes.

When you see a completion message on the LCD screen, ink priming is finished.

Caution: Never turn off the product while ink is priming or you'll waste ink. If you still

see an ink replacement message on the LCD screen, select Proceed, lift up the

scanner unit, and press down all the cartridges securely. Then lower the scanner unit. If

you remove a low or expended ink cartridge, you cannot reinstall and use the cartridge.

Note: If you replaced a cartridge while copying a document or photo, cancel printing

and make sure your original is still placed correctly on the document table. Then copy

your original again.

Replacing Ink Cartridges