Siemens SIMATIC ET 200AL Panduan Peralatan - Halaman 20

Jelajahi secara online atau unduh pdf Panduan Peralatan untuk Peralatan Industri Siemens SIMATIC ET 200AL. Siemens SIMATIC ET 200AL 46 halaman. 10-link digital output module dq 8x24vdc/2a 8xm12
Juga untuk Siemens SIMATIC ET 200AL: Manual (38 halaman), Manual (50 halaman), Manual (38 halaman), Manual (32 halaman), Manual (37 halaman), Manual (26 halaman), Panduan Peralatan (28 halaman), Panduan Peralatan (27 halaman), Manual (25 halaman)

Halaman Cetak
Siemens SIMATIC ET 200AL Panduan Peralatan
The following table shows how to set PROFIBUS address 26 as an example.
Table 3- 5
Connecting the terminating resistor for PROFIBUS DP
Terminate a PROFIBUS DP segment, on both of its ends, which means on the first and last
device of the segment, with its characteristic impedance. There are two different terminating
resistors available for this purpose, for sockets and for connectors.
The figure below shows typical use of a terminating resistor.
①
②
Figure 3-3
IM 157-1 DP (6ES7157-1AA00-0AB0)
Equipment Manual, 08/2021, A5E32100641-AE
Setting of the PROFIBUS address
PROFIBUS infeed (connector)
M12 socket with terminating resistor
Terminating resistor
3.3 Configuring PROFIBUS DP address and terminating resistor
Tens digit
Ones digit
Position 2
Position 6
Wiring
19