Siemens SIMATIC ET 200AL Manual do equipamento - Página 20

Procurar online ou descarregar pdf Manual do equipamento para Equipamento industrial Siemens SIMATIC ET 200AL. Siemens SIMATIC ET 200AL 46 páginas. 10-link digital output module dq 8x24vdc/2a 8xm12
Também para Siemens SIMATIC ET 200AL: Manual (38 páginas), Manual (50 páginas), Manual (38 páginas), Manual (32 páginas), Manual (37 páginas), Manual (26 páginas), Manual do equipamento (28 páginas), Manual do equipamento (27 páginas), Manual (25 páginas)

Imprimir página

Siemens SIMATIC ET 200AL Manual do equipamento

The following table shows how to set PROFIBUS address 26 as an example.

Table 3- 5

Connecting the terminating resistor for PROFIBUS DP

Terminate a PROFIBUS DP segment, on both of its ends, which means on the first and last

device of the segment, with its characteristic impedance. There are two different terminating

resistors available for this purpose, for sockets and for connectors.

The figure below shows typical use of a terminating resistor.

①

②

Figure 3-3

IM 157-1 DP (6ES7157-1AA00-0AB0)

Equipment Manual, 08/2021, A5E32100641-AE

Setting of the PROFIBUS address

PROFIBUS infeed (connector)

M12 socket with terminating resistor

Terminating resistor

3.3 Configuring PROFIBUS DP address and terminating resistor

Tens digit

Ones digit

Position 2

Position 6

Wiring