Siemens SIMATIC ET 200S Panduan Pengguna - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Industri Siemens SIMATIC ET 200S. Siemens SIMATIC ET 200S 26 halaman. Distributed i/o digital electronic module 4do dc24v/2a hf
Juga untuk Siemens SIMATIC ET 200S: Panduan Operator (18 halaman), Manual (16 halaman), Panduan Pengguna (16 halaman), Manual (37 halaman), Manual (24 halaman), Manual Fungsi (40 halaman), Petunjuk Pengoperasian (4 halaman), Petunjuk Pengoperasian Asli (19 halaman), Petunjuk Pengoperasian Asli (20 halaman), Manual (34 halaman), Manual (14 halaman), Manual (24 halaman), Petunjuk Pengoperasian Asli (17 halaman), Petunjuk Pengoperasian Asli (19 halaman), Manual (16 halaman), Manual (28 halaman), Manual (12 halaman), Manual (32 halaman), Manual (18 halaman), Manual (12 halaman), Manual (28 halaman), Manual (22 halaman), Manual (22 halaman), Manual (36 halaman), Manual (16 halaman)

Halaman Cetak
Siemens SIMATIC ET 200S Panduan Pengguna
2AI U HF technical data (6ES7134-4LB02-0AB0)
Width (mm)
Weight
Supports isochronous operation
Supports I&M functions
Number of inputs
Cable length
•
Parameter length
Address space
Analog value representation
Supported if no interference frequency suppression or smoothing is configured.
1
Rated load voltage L+ (from the power module)
•
•
Electrical isolation
•
•
•
Permissible potential difference
•
•
Insulation tested
Current consumption
•
Power dissipation of the module
Diagnostics function
•
•
•
Hardware interrupts are only sent if the process interrupt mechanism is not overloaded.
2
2AI U HF analog electronic module (6ES7134-4LB02-0AB0)
Manual, 04/2007, A5E01076007-01
Shielded
Reverse polarity protection
Supply of the transmitters
Between the channels and backplane bus
Between the channels and load voltage L+
Between the channels
Between channels (U
)
CM
Between M
and the central grounding point
ANA
(U
)
iso
From load voltage L+
Group error
Diagnostic functions readable
Hadware interrupts
2
1.1 2AI U HF analog electronic module (6ES7134-4LB02-0AB0)
Dimensions and weight
15
Approx. 45 g
Module-specific data
Yes
1
Yes
2
Max. 200 m
12 bytes
4 bytes
S5 and S7 format
Voltages, currents, potentials
24 VDC
Yes
No
Yes
Yes
No
140 VDC / 100 VAC
75 V DC, 60 V AC
500 VDC
Max. 55 mA
Typically 0.85 W
Status, interrupts, diagnostics
Red "SF" LED
Yes
Configurable, violation of upper and lower limits
Properties
9