Siemens SIMATIC ET 200S Panduan Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Industri Siemens SIMATIC ET 200S. Siemens SIMATIC ET 200S 26 halaman. Distributed i/o digital electronic module 4do dc24v/2a hf
Juga untuk Siemens SIMATIC ET 200S: Panduan Operator (18 halaman), Manual (16 halaman), Panduan Pengguna (16 halaman), Manual (37 halaman), Manual (24 halaman), Manual Fungsi (40 halaman), Petunjuk Pengoperasian (4 halaman), Petunjuk Pengoperasian Asli (19 halaman), Petunjuk Pengoperasian Asli (20 halaman), Manual (34 halaman), Manual (14 halaman), Manual (24 halaman), Petunjuk Pengoperasian Asli (17 halaman), Petunjuk Pengoperasian Asli (19 halaman), Manual (16 halaman), Manual (28 halaman), Manual (12 halaman), Manual (32 halaman), Manual (18 halaman), Manual (12 halaman), Manual (28 halaman), Manual (22 halaman), Manual (22 halaman), Manual (36 halaman), Manual (16 halaman)

Properties

1.1

Properties

● 2 inputs for measuring voltage

● Input ranges:

● Isolated from the load voltage L+

● Permitted common-mode voltage between the channels 100 VAC

● Supports isochronous operation

● Supports I&M functions

General terminal assignment

Note

Terminals 4, 8, A4, A8, A3 and A7 are only available at specified terminal modules.

Terminal

Assignment Terminal

n.c.

AUX1

2AI U HF analog electronic module (6ES7134-4LB02-0AB0)

Manual, 04/2007, A5E01076007-01

– ± 5 V, resolution 15 bits + sign

– ± 10 V, resolution 15 bits + sign

– 1 V to 5 V, resolution 15 bits

– Minimum time for the isochronous DP cycle (T

– Minimum conversion time of the input modules (T

Terminal assignment for 2AI U HF (6ES7134-4LB02-0AB0)

Assignment

n.c.

AUX1

: Input signal "+", channel n

•

: Input signal "-", channel n

•

n.c.: Not connected (max. 30 V DC can be connected)

•

AUX1: Protective-conductor terminal or potential bus (freely usable

•

up to 230 VAC)

): 0.7 ms

DPmin

): 0.5 ms

WEmin

Notes