Siemens SIMATIC ET 200SP Manual - Halaman 12

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Industri Siemens SIMATIC ET 200SP. Siemens SIMATIC ET 200SP 40 halaman. Distributed i/o system
Juga untuk Siemens SIMATIC ET 200SP: Panduan Pengguna (21 halaman), Manual (34 halaman), Manual (48 halaman), Manual (30 halaman), Manual (34 halaman), Informasi Produk (38 halaman), Manual (37 halaman), Manual (36 halaman), Manual (44 halaman), Manual (31 halaman), Manual (35 halaman), Manual (23 halaman), Panduan Konfigurasi (20 halaman), Manual (34 halaman), Manual (29 halaman), Manual (33 halaman), Manual (31 halaman), Panduan Pengguna (32 halaman), Manual (31 halaman), Manual (28 halaman), Manual (41 halaman), Manual (32 halaman), Manual (49 halaman), Manual (24 halaman), Manual (34 halaman), Manual (41 halaman), Manual (30 halaman), Manual (31 halaman), Manual (27 halaman), Manual (24 halaman), Manual (24 halaman), Manual (25 halaman), Manual (49 halaman), Manual (40 halaman), Manual (38 halaman), Manual (39 halaman), Informasi Produk (24 halaman), Manual (32 halaman), Informasi Produk (10 halaman), Panduan Peralatan (43 halaman), Manual (33 halaman), Panduan Peralatan (44 halaman), Petunjuk Pengoperasian Asli (6 halaman), Manual (35 halaman), Manual (28 halaman), Panduan Peralatan (32 halaman), Manual (50 halaman), Manual (30 halaman), Manual (26 halaman), Manual (28 halaman), Manual (34 halaman), Manual (44 halaman), Manual (33 halaman), Panduan Peralatan (42 halaman), Manual Petunjuk Asli (16 halaman)

Halaman Cetak
Siemens SIMATIC ET 200SP Manual
Product overview

2.3 Differences between F-CPU 1510SP F-1 PN and standard CPU 1510SP-1 PN

2.3
Differences between F-CPU 1510SP F-1 PN and standard
CPU 1510SP-1 PN
Areas of application
CPU 1510SP F-1 PN is mainly used for the protection of personnel and machinery and
burner controls. In addition to the safety program, you can also program standard
applications.
Table 2- 1
Areas of application
You intend to use CPU 1510SP F-1 PN for
Safety-related applications
Standard applications
PFD, PFH values for S7-1500 F-CPUs
Below you will find the probability of failure values (PFD
with a service life of 20 years and with a repair time of 100 hours:
Operation in low demand mode
low demand mode
According to IEC 61508:2010:
PFD
= Average probability of a dangerous failure on
avg
demand
< 2E-05
Restriction with "CREAT_DB" and "DELETE_DB"
F-DBs can neither be created nor deleted.
Restriction with "READ_DBL" and "WRIT_DBL"
The destination address must not point to an F-DB.
Restrictions when configuring the retentive behavior of data blocks
The configuration of the retentive behavior of data blocks is not supported for F-DBs.
This means that the actual values of the F-DBs will not be retentive in the event of Power
OFF/ON and Restart (STOP-RUN) of the F-CPU. The F-DBs retain the initial values from the
load memory.
The "Retain" check box is grayed-out for all tags in F-DBs.
12
then you require
STEP 7 Professional V13 SP1 or higher
Optional package STEP 7 Safety Advanced V13 SP1 or
higher
STEP 7 Professional V13 SP1 or higher
, PFH values) for S7-1500 F-CPUs
avg
Operation in high demand or continuous mode
high demand/continuous mode
According to IEC 61508:2010:
PFH = Average frequency of a dangerous failure [h
< 1E-09
CPU 1510SP F-1 PN (6ES7510-1SJ00-0AB0)
]
-1
Manual, 12/2014, A5E35264953-AA