Siemens SIMATIC ET 200SP Manual - Halaman 10

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Industri Siemens SIMATIC ET 200SP. Siemens SIMATIC ET 200SP 24 halaman. Distributed i/o system
Juga untuk Siemens SIMATIC ET 200SP: Manual (40 halaman), Panduan Pengguna (21 halaman), Manual (34 halaman), Manual (48 halaman), Manual (30 halaman), Manual (34 halaman), Informasi Produk (38 halaman), Manual (37 halaman), Manual (36 halaman), Manual (44 halaman), Manual (31 halaman), Manual (35 halaman), Manual (23 halaman), Panduan Konfigurasi (20 halaman), Manual (34 halaman), Manual (29 halaman), Manual (33 halaman), Manual (31 halaman), Panduan Pengguna (32 halaman), Manual (31 halaman), Manual (28 halaman), Manual (41 halaman), Manual (32 halaman), Manual (49 halaman), Manual (34 halaman), Manual (41 halaman), Manual (30 halaman), Manual (31 halaman), Manual (27 halaman), Manual (24 halaman), Manual (24 halaman), Manual (25 halaman), Manual (49 halaman), Manual (40 halaman), Manual (38 halaman), Manual (39 halaman), Informasi Produk (24 halaman), Manual (32 halaman), Informasi Produk (10 halaman), Panduan Peralatan (43 halaman), Manual (33 halaman), Panduan Peralatan (44 halaman), Petunjuk Pengoperasian Asli (6 halaman), Manual (35 halaman), Manual (28 halaman), Panduan Peralatan (32 halaman), Manual (50 halaman), Manual (30 halaman), Manual (26 halaman), Manual (28 halaman), Manual (34 halaman), Manual (44 halaman), Manual (33 halaman), Panduan Peralatan (42 halaman), Manual Petunjuk Asli (16 halaman)

Halaman Cetak
Siemens SIMATIC ET 200SP Manual

Wiring up

3.1

Terminal assignment

General terminal assignment
Table 3- 1
Terminal assignment
Terminal assignment for RQ 4×120VDC-230VAC/5A NO ST (6ES7132-6HD00-0BB0)
Terminal
Assignment Terminal
1
RQ
+
0
3
RQ
+
2
5
RQ
-
0
7
RQ
-
2
9
Reserved
11
Reserved
1A
AUX
3A
AUX
Usable BaseUnit types, can be identified by the last two digits of the article number.
1
Note
The first BaseUnit of a station must be a light-colored BaseUnit. Also keep this in mind
during the configuration.
Since the RQ 4×120VDC-230VAC/5A NO ST digital output module requires a dark
BaseUnit, configuration is possible from the 2nd module.
Note
• The relay contacts of the module may only switch identical voltage potential.
• The AUX terminals may only be used with an associated identical voltage or PE.
See also
You will find additional information on the BaseUnit types in the ET 200SP distributed I/O
system (http://support.automation.siemens.com/WW/view/en/58649293) system manual.
10
Assignment Explanation
2
RQ
+
1
4
RQ
+
3
6
RQ
-
1
8
RQ
-
3
10
Reserved
12
Reserved
2A
AUX
4A
AUX
RQ
+, RQ
-: Channel n
•
n
n
AUX: PE terminal
•
connection or voltage bus
(freely usable up to
230 VAC)
Normally open contact
Digital output module RQ 4x120VDC-230VAC/5A NO ST (6ES7132-6HD00-0BB0)
BaseUnit
Color identification label
1
(terminals 1 to 16)
B0
---
Manual, 07/2014, A5E03576775-AB
3