Siemens SIMATIC ET 200SP Manual - Halaman 12

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Industri Siemens SIMATIC ET 200SP. Siemens SIMATIC ET 200SP 24 halaman. Distributed i/o system
Juga untuk Siemens SIMATIC ET 200SP: Manual (40 halaman), Panduan Pengguna (21 halaman), Manual (34 halaman), Manual (48 halaman), Manual (30 halaman), Manual (34 halaman), Informasi Produk (38 halaman), Manual (37 halaman), Manual (36 halaman), Manual (44 halaman), Manual (31 halaman), Manual (35 halaman), Manual (23 halaman), Panduan Konfigurasi (20 halaman), Manual (34 halaman), Manual (29 halaman), Manual (33 halaman), Manual (31 halaman), Panduan Pengguna (32 halaman), Manual (31 halaman), Manual (28 halaman), Manual (41 halaman), Manual (32 halaman), Manual (49 halaman), Manual (34 halaman), Manual (41 halaman), Manual (30 halaman), Manual (31 halaman), Manual (27 halaman), Manual (24 halaman), Manual (24 halaman), Manual (25 halaman), Manual (49 halaman), Manual (40 halaman), Manual (38 halaman), Manual (39 halaman), Informasi Produk (24 halaman), Manual (32 halaman), Informasi Produk (10 halaman), Panduan Peralatan (43 halaman), Manual (33 halaman), Panduan Peralatan (44 halaman), Petunjuk Pengoperasian Asli (6 halaman), Manual (35 halaman), Manual (28 halaman), Panduan Peralatan (32 halaman), Manual (50 halaman), Manual (30 halaman), Manual (26 halaman), Manual (28 halaman), Manual (34 halaman), Manual (44 halaman), Manual (33 halaman), Panduan Peralatan (42 halaman), Manual Petunjuk Asli (16 halaman)

Halaman Cetak
Siemens SIMATIC ET 200SP Manual

Parameters/address space

4.1

Parameters

Parameters for RQ 4x120VDC-230VAC/5A NO ST
The effective range of the parameters depends on the type of configuration. The following
configurations are possible:
● Central operation with an S7-1500 CPU
● Distributed operation on PROFINET IO in an ET 200SP system
● Distributed operation on PROFIBUS DP in an ET 200SP system
When assigning parameters in the user program, use the "WRREC" instruction to
transfer the parameters to the module using the data records; refer to the section
Parameter assignment and structure of the parameter data record (Page 23).
The following parameter settings are possible:
Table 4- 1
Settable parameters and their defaults (GSD file)
Parameter
Diagnostics
No supply voltage L+
Operating mode
Reaction to CPU STOP •
Substitute value
Due to the limited number of parameters at a maximum of 244 bytes per ET 200SP station with a PROFIBUS GSD
1
configuration, the configuration options are restricted. If required, you can assign these parameters using data
record 128 as described in the "GSD file PROFINET IO" column (see table above). The parameter length of
the I/O module is 8 bytes.
12
Value range
Enable
•
Disable
•
Channel disabled
•
Channel enabled
•
Turn off
Keep last value
•
Output substitute value
•
0
•
1
•
Default
Configuration
in RUN
Disable
yes
Channel
yes
enabled
Turn off
yes
0
yes
Digital output module RQ 4x120VDC-230VAC/5A NO ST (6ES7132-6HD00-0BB0)
Effective range with configuration
software, e.g. STEP 7 (TIA Portal)
GSD file
GSD file
PROFINET IO
PROFIBUS DP
Module
Module
Channel
Channel
Channel
Module
Channel
Channel
Manual, 07/2014, A5E03576775-AB
4
1