Siemens SIMATIC ET 200SP Manual - Halaman 29

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Industri Siemens SIMATIC ET 200SP. Siemens SIMATIC ET 200SP 49 halaman. Distributed i/o system
Juga untuk Siemens SIMATIC ET 200SP: Manual (40 halaman), Panduan Pengguna (21 halaman), Manual (34 halaman), Manual (48 halaman), Manual (30 halaman), Manual (34 halaman), Informasi Produk (38 halaman), Manual (37 halaman), Manual (36 halaman), Manual (44 halaman), Manual (31 halaman), Manual (35 halaman), Manual (23 halaman), Panduan Konfigurasi (20 halaman), Manual (34 halaman), Manual (29 halaman), Manual (33 halaman), Manual (31 halaman), Panduan Pengguna (32 halaman), Manual (31 halaman), Manual (28 halaman), Manual (41 halaman), Manual (32 halaman), Manual (49 halaman), Manual (24 halaman), Manual (34 halaman), Manual (41 halaman), Manual (30 halaman), Manual (31 halaman), Manual (27 halaman), Manual (24 halaman), Manual (24 halaman), Manual (25 halaman), Manual (40 halaman), Manual (38 halaman), Manual (39 halaman), Informasi Produk (24 halaman), Manual (32 halaman), Informasi Produk (10 halaman), Panduan Peralatan (43 halaman), Manual (33 halaman), Panduan Peralatan (44 halaman), Petunjuk Pengoperasian Asli (6 halaman), Manual (35 halaman), Manual (28 halaman), Panduan Peralatan (32 halaman), Manual (50 halaman), Manual (30 halaman), Manual (26 halaman), Manual (28 halaman), Manual (34 halaman), Manual (44 halaman), Manual (33 halaman), Panduan Peralatan (42 halaman), Manual Petunjuk Asli (16 halaman)

Halaman Cetak
Siemens SIMATIC ET 200SP Manual
Interrupts/diagnostics interrupts

5.2 Interrupts

5.2
Interrupts
The analog input module AI 2×U/I 2-/4-wire HS supports hardware and diagnostic interrupts.
Evaluating hardware interrupts with IO controller
The module generates a hardware interrupt at the following events:
● Low limit 1 violated
● High limit 1 violated
● Low limit 2 violated
● High limit 2 violated
If an interrupt occurs, a corresponding interrupt OB is called in the CPU of the IO controller.
S7-1500
Detailed information on the event is available in the STEP 7 online help.
The block interface is shown here with optimized block access, which is set in the TIA Portal
by default.
Name
Data type
LADDR
HW_IO
USI
WORD
IChannel
USInt
EventType
Byte
28
Comment
Hardware identifier of the module triggering the interrupt
USI (High/Low)
Channel that triggered the hardware interrupt
Error event
Analog input module AI 2xU/I 2-/4-wire HS (6ES7134-6HB00-0DA1)
Manual, 09/2018, A5E03576060-AF