Siemens SIMATIC ET 200SP Manual - Halaman 14

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Industri Siemens SIMATIC ET 200SP. Siemens SIMATIC ET 200SP 40 halaman. Distributed i/o system
Juga untuk Siemens SIMATIC ET 200SP: Manual (40 halaman), Panduan Pengguna (21 halaman), Manual (34 halaman), Manual (48 halaman), Manual (30 halaman), Manual (34 halaman), Informasi Produk (38 halaman), Manual (37 halaman), Manual (36 halaman), Manual (44 halaman), Manual (31 halaman), Manual (35 halaman), Manual (23 halaman), Panduan Konfigurasi (20 halaman), Manual (34 halaman), Manual (29 halaman), Manual (33 halaman), Manual (31 halaman), Panduan Pengguna (32 halaman), Manual (31 halaman), Manual (28 halaman), Manual (41 halaman), Manual (32 halaman), Manual (49 halaman), Manual (24 halaman), Manual (34 halaman), Manual (41 halaman), Manual (30 halaman), Manual (31 halaman), Manual (27 halaman), Manual (24 halaman), Manual (24 halaman), Manual (25 halaman), Manual (49 halaman), Manual (38 halaman), Manual (39 halaman), Informasi Produk (24 halaman), Manual (32 halaman), Informasi Produk (10 halaman), Panduan Peralatan (43 halaman), Manual (33 halaman), Panduan Peralatan (44 halaman), Petunjuk Pengoperasian Asli (6 halaman), Manual (35 halaman), Manual (28 halaman), Panduan Peralatan (32 halaman), Manual (50 halaman), Manual (30 halaman), Manual (26 halaman), Manual (28 halaman), Manual (34 halaman), Manual (44 halaman), Manual (33 halaman), Panduan Peralatan (42 halaman), Manual Petunjuk Asli (16 halaman)

Product overview

2.3 Replacement of the IO-Link Master CM 4xIO-Link communication module with an electronic coding element

type H

Master Backup

In addition to saving the parameters in the electronic coding element, you can back up the

parameters of your module, firmware version V2.2 or higher, with the function block

"IO_LINK_MASTER".

The "IO_LINK_MASTER" function block is used to read all relevant IO-Link device and

IO-Link master parameters. These can be stored retentively at a central location, such as in

a data block in the IO controller.

The status of the IO-Link devices or IO-Link ports stored in the IO-Link master can be

restored with the "IO_LINK_MASTER" function block.

As a result, the IO-Link ports and the IO-Link master are configured with the values stored in

the master backup.

A typical application is restoring the parameters after replacement of the IO-Link master.

Note

Availability

Note that the Master Backup function is available only for IO-Link devices that are specified

for the IO-Link Standard as of V1.1.

You will find further information on the Master Backup functions in section "Master backup"

of chapter "Integration into the automation system" of the IO-Link System

(https://support.industry.siemens.com/cs/ww/en/view/65949252) function manual.

Reference

For more information on the topic of "Coding element", refer to the Changing the type of an

I/O module chapter of the ET 200SP distributed I/O system

(http://support.automation.siemens.com/WW/view/en/58649293) system manual.

Communication module IO-Link Master CM 4xIO-Link (6ES7137-6BD00-0BA0)

Manual, 10/2017, A5E03856846-AD