Siemens SIMATIC ET 200SP Manual - Halaman 10

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Industri Siemens SIMATIC ET 200SP. Siemens SIMATIC ET 200SP 33 halaman. Distributed i/o system
Juga untuk Siemens SIMATIC ET 200SP: Manual (40 halaman), Panduan Pengguna (21 halaman), Manual (34 halaman), Manual (48 halaman), Manual (30 halaman), Manual (34 halaman), Informasi Produk (38 halaman), Manual (37 halaman), Manual (36 halaman), Manual (44 halaman), Manual (31 halaman), Manual (35 halaman), Manual (23 halaman), Panduan Konfigurasi (20 halaman), Manual (34 halaman), Manual (29 halaman), Manual (33 halaman), Manual (31 halaman), Panduan Pengguna (32 halaman), Manual (31 halaman), Manual (28 halaman), Manual (41 halaman), Manual (32 halaman), Manual (49 halaman), Manual (24 halaman), Manual (34 halaman), Manual (41 halaman), Manual (30 halaman), Manual (31 halaman), Manual (27 halaman), Manual (24 halaman), Manual (24 halaman), Manual (25 halaman), Manual (49 halaman), Manual (40 halaman), Manual (38 halaman), Manual (39 halaman), Informasi Produk (24 halaman), Manual (32 halaman), Informasi Produk (10 halaman), Panduan Peralatan (43 halaman), Panduan Peralatan (44 halaman), Petunjuk Pengoperasian Asli (6 halaman), Manual (35 halaman), Manual (28 halaman), Panduan Peralatan (32 halaman), Manual (50 halaman), Manual (30 halaman), Manual (26 halaman), Manual (28 halaman), Manual (34 halaman), Manual (44 halaman), Manual (33 halaman), Panduan Peralatan (42 halaman), Manual Petunjuk Asli (16 halaman)

Product overview

2.2 Functions

2.2

Functions

Introduction

The interface module supports the following PROFINET IO functions:

● Integrated switch with 2 ports

● Supported Ethernet services: ping, arp, network diagnostics (SNMP: MIB2, LLDP-MIP

and MRP-MIB)

● Port diagnostics

● Deactivating of ports

● Minimum update time 1 ms

● Media redundancy MRP

● Device replacement without programming device

● Reset to factory settings via PROFINET IO

● Firmware update via PROFINET IO

The interface module supports additional functions:

● Identification data I&M 0 to 3

● Device replacement with and without topological configuration

● Configuration control (option handling)

Requirements

Configuration takes place with GSDML or STEP 7 V13/HSPxyz.

Cabling with fixed connection setting

If you set a fixed connection setting of the port in STEP 7, you must also disable

"Autonegotiation/Autocrossover".

You can find more information on this topic in the STEP 7 online help and

● As of STEP 7 V12, in the function manual PROFINET with STEP 7 V13

(http://support.automation.siemens.com/WW/view/de/49948856/0/en)

● As of STEP 7 V5.5, in the system manual PROFINET System Description

(http://support.automation.siemens.com/WW/view/en/19292127).

IM 155-6 PN BA interface module (6ES7155-6AR00-0AN0)

Manual, 03/2015, A5E34934425-AA